Tumble Dryer Poly-Vee Drive Belt - 1975H6 Stock Number: ES501196
Genuine spare part for select models of Privileg, Zanussi and AEG tumble dryers
Overall rating
Product Reviews
Write a review-
d.j.c slough
-
John Scotland5.0 out of 5
Best on-line spares site 01 March 2015
This is a great site for finding the correct replacement part for your appliance. I purchased a replacement tumble dryer drive belt and their video for fitting the belt made it so easy for me to fit it.
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
vilau Watford5.0 out of 5
A good purchase 30 January 2015
Excellent quality replacement drum drive belt. Reasonable price considering the length of the belt, quite easy to fit and, surprisingly to me, it has definitely improved the drying performance of the tumble drier.
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
Anonymous newcastle5.0 out of 5
Good product 15 January 2015
easy to fit, once we had worked out how to get the side off the washer! Espares were great as usual with delivery and parts available.
Ease of fitting 4.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
Anonymous4.0 out of 5
tumble dryer dive belt 13 January 2015
item arrived within in time stated, correct item to fix the machine, very pleased with service.
Ease of fitting 4.0 out of 5 Quality 4.0 out of 5 Value 4.0 out of 5 -
Martin.g.g Croydon5.0 out of 5
Zanusi tumble drier drive belt change 13 January 2015
Not an easy fix and not obvious that the side panel need removing as no rear access. Took me an hour to work out how to replace the belt. The top need to come off the side panel. Then the drum needs to be eased off the front bearing/bush so the band can be slid over the drum. Could do with video showing how this is done.
Ease of fitting 1.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
Markjohn2001 Bangor, NI5.0 out of 5
Saved a fortune 07 January 2015
When the belt on our tumble drier broke, my wife was all set on getting a new machine. However, with the help of eSpares and YouTube I managed to fit the new belt with little difficulty.Very satisfying!
Ease of fitting 5.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
Andy Stockton5.0 out of 5
Good quality 05 January 2015
I Chose this belt because the price was what I was expecting to pay, there were cheaper alternatives but as the job of replacing a dryer belt is sometimes a tricky one I do not want to do it again in a hurry. The belt felt of a good quality and seemed a slightly bit thicker than the original. After following an e spares video showing how to do the job, it was quite a simple procedure to install. Also took the opportunity to Hoover out all the accumulated fluff in the depths of the machine, as all the sides, top and back were removed. It is now running like a new dryer.
Ease of fitting 4.0 out of 5 Quality 5.0 out of 5 Value 4.0 out of 5 -
Anonymous5.0 out of 5
Great service 16 October 2014
Arrived in a very short time received an email with in one hour of order and recieved it in good time Thanks
Ease of fitting 4.0 out of 5 Quality 4.0 out of 5 Value 4.0 out of 5 -
Spike5.0 out of 5
Well worth the DIY 30 September 2014
I ordered this as the belt on my AEG Lavatherm 56830 had snapped. The quality appears to be the same as the OE belt that lasted 12 years so we shall see. I would not suggest you take on the job of fitting this belt if you are not mechanically adept. The "How To" video on e spares is excellent but on my model to save removing the two piece back panels (and possibly ruin the gaskets) I found it easier to remove the front. Follow the video to remove the top and side panels, No need to remove the door, the two screws that hold the water tank housing on when removing the control panel are longer than the others and one holding the lower front panel is of a different type. Check that you have removed the correct screws, don't force anything. Be sure to chock the drum and the front will come forward enough to slip the belt between the front and the drum face. There is an earthing carbon brush housing under the drum to the left which you should in unclip and when replacing ensure is in contact with the drum(check the snail spring). The whole job took me less than an two hours but I could halve that if I did it again. Job Done, loads of money saved. Hooray for eSpares!
Ease of fitting 3.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5
Ratings-Only Reviews
Overall Rating | 4.9 stars | 4.9 |
---|---|---|
Ease of fitting | 4.0 stars | 4.0 |
Quality | 4.0 stars | 4.0 |
Value | 4.0 stars | 4.0 |
Based on the average of 17 ratings-only reviews
Will this part fit my appliance?
Check Now- In Stock Available for immediate despatch
- Delivery Available About delivery
- We won't be beaten on price Price match guarantee
first class service 23 May 2015
first class service and deliverd as promised and will use you again for shore