Washing Machine Carbon Brushes - Pack of 2 Stock Number: ES479438

Overall rating

• gus360 Livingston
  2.0 out of 5

  Review of fitting brush holders to Candy Washing Machines 04 November 2010

  This information will vary depending on motor type fitted. The brush holders come with spade connector adapters which can be used or not if the the motor is fitted with the small type and the holders the large ones, this results in the connections protruding out beyond the holders, not ideal! The holders themselves fit ok on the motor but if your brushes require replacing then your commutator is probably worn reducing the area of contact. Ideally you should bed them in using very fine sandpaper wrapped around the commutator and make a back and forward movement to make the brush profile the same as the commutator, repeat on the other brush and remove carbon dust. You will find this quite difficult due to the small size of the commutator. Check the rotor rotates freely and the brushes are not noisy. Refit the motor and test.

  Quality	3.0 out of 5
  Value	2.0 out of 5
  Ease of fitting	1.0 out of 5