Washing Machine Interference Filter Stock Number: ES1570624
Genuine spare part for select Beko washing machines
Manufactured by Beko
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Interference Filter
This replacement interference filter is responsible for suppressing any electrical interference or noise that occurs when your appliance is in use. If your interference filter has become damaged or faulty over time, then this genuine replacement filter might just be the ideal part for you. This replacement filter is perfect to help get your washer performing like new again.
Genuine spare part suitable for select models of Beko washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
3 Questions and 5 Answers
HAD NEW CIRCUIT PUT IT ON BUT WOULD NOT FILL UP WITH WATER LOOKED AT WHAT LOOKED LIKE A SOLENOID WONDER IF THAT IS WHAT THE TROUBLE IS ?
-
Chris at eSpares says...
No this is the mains filter, The two parts involved with water inlet are the valve and the PCB. However the PCB can prevent water filling if it thinks there is another problem. This is why we suggest looking at our videos to diagnose the problem before just ordering parts.
- could not get on to the video, would just like to know if the part lets water fill into the machine and remove it when finished . if not what part does it.
-
Chris at eSpares says...
For information to diagnose your problem see our video: http://www.espares.co.uk/advice/7/1825/how-to-diagnose-washing-machine-dispenser-and-filling-problems
my machine stopped working there is power no signs of any electrical working have changed fuse but still nothing is it the interference filter or the motor 1 Answer
-
Chris at eSpares says...
For information to diagnose your problem see our video: How to Diagnose Washing Machine Control and Program Problems www.espares.co.uk/advice/7/1793
I have a BEKO WME8227W washing machine and the main motor does not function correctly. When set to spin, on pushing the start button the pump out motor works but then, when the main motor should start, there is either no action or a short burst and then an immediate stoppage. I have checked the brushes on the main motor and they seem to be in good condition with at least one and a half centimeters of brush exposed when they are removed from the motor. I am wondering whether a faulty interference filter could cause these symptoms or whether there is another relay somewhere that could be the problem. Yours faithfully, Jonathan Marman
-
Chris at eSpares says...
For information to diagnose your problem see our video: How to Diagnose Washing Machine Motor Problems: http://www.espares.co.uk/advice/7/1730
Will this part fit my appliance?
Check Now
