Washing Machine Analogic Pressure Switch Stock Number: ES1384475
Genuine spare part for select AEG, Arthur Martin, Electrolux, Elektro Helios, Faure, Husqvarna, John Lewis, Juno, Kuppersbusch, Novamatic, Privileg, Rex, Rosenlew, Silentic, Tricity Bendix, Zanker, Zanussi and Zoppas washers
Manufactured by Electrolux
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
If your washer is overfilling then you could have a faulty switch. The pressure switch controls how much water is passed through your washing machine and how much leaves it.
This is a genuine spare part and will fit the AEG, Arthur Martin, Electrolux, Elektro Helios, Faure, Husqvarna, John Lewis, Juno, Kuppersbusch, Novamatic, Privileg, Rex, Rosenlew, Silentic, Tricity Bendix, Zanker, Zanussi and Zoppas washers in the list of appliances.
1 Question and 1 Answer
Hi, my Zanussi washing machine (zwf14069w) is faulty,firstly I found a hairclip jammed in the drain pump,after removing this,every time I press start the drain pump comes on even though there's no water in the basin,it then goes in to fault mode,any ideas?
-
Chris at eSpares says...
There may be a fault with the pressure switch but before you replace make sure there is no water in the machine and disconnect the pressure pipe from the switch to reset the level.Reconnect after blowing down the tube to the drum and proving it is not blocked as the chamber that feeds the tube can block with detergent build up.
Will this part fit my appliance?
Check Now
