My Zanussi washing machine is faulty
Hi, my Zanussi washing machine (zwf14069w) is faulty,firstly I found a hairclip jammed in the drain pump,after removing this,every time I press start the drain pump comes on even though there's no water in the basin,it then goes in to fault mode,any ideas?
Answer this Question (1 Answer)
-
Chris at eSpares says...
There may be a fault with the pressure switch but before you replace make sure there is no water in the machine and disconnect the pressure pipe from the switch to reset the level.Reconnect after blowing down the tube to the drum and proving it is not blocked as the chamber that feeds the tube can block with detergent build up.
Washing Machine Analogic Pressure Switch Stock Number: ES1384475
Genuine spare part for select AEG, Arthur Martin, Electrolux, Elektro Helios, Faure, Husqvarna, John Lewis, Juno, Kuppersbusch, Novamatic, Privileg, Rex, Rosenlew, Silentic, Tricity Bendix, Zanker, Zanussi and Zoppas washers
Q&A tips & guidelines
-
Focus on the features or function of the product
-
Write your question in clear English
-
Be polite! Profanity won't be approved
-
Don't include personal info
-
Don't name other websites
-
Don't mention product prices