Neff Fan Oven Element - 2300W for U1721N2GB/01 Stock Number: ES209572

Overall rating

• DAP Solihull
  4.0 out of 5

  Seems Fine 10 January 2017

  Element was accurate sizing/fitment wise but original had separate earth connection that was not on this copy so had to remove oven and make sure earth could not touch any of the live/neutral terminals. Working fine so all it has to do now is last!

  Ease of fitting	3.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• Michael Bromley, Kent
  4.0 out of 5

  Extremely good value 04 November 2016

  Fan Oven Element 2300W - the helpful video gives you the confidence to fit this element (rather than pay someone a £60+ vat call-out charge). I had no problems fitting, though this is my fourth replacement element in my two identical ovens (over about six years) so I believe their 'life' might be just a little shorter than the manufacturer's own element, but the latter would have cost me three times as much. So, all-in-all in my opinion it's simply great value, and I have just ordered two more spare elements, so that I am ready for the future. I have also bought replacement rubber seals through this company for my two ovens - these are lasting-up very well and again were great value.

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	5.0 out of 5

• G Townley Lymington Hants
  4.0 out of 5

  Your information & product were very helpful 24 October 2016

  Found the advice on how to carry out the repair, on the internet, very helpful. Product was delivered promptly, though one of the two contacts had been badly bent, fortunately I was able to straighten it with pliers and it went back into the oven correctly. Very satisfied

  Ease of fitting	5.0 out of 5
  Quality	4.0 out of 5
  Value	5.0 out of 5

• David H
  4.0 out of 5

  Twenty months to beat 11 October 2016

  This is the second time I have purchased the same 2300W Fan Oven element. The previous one expired after 20 months, hence this new replacement. Hopefully it will last a little longer.

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	5.0 out of 5

• JLS Berkshire
  4.0 out of 5

  Product worked 11 October 2016

  Terminals were bent, and required straightening prior to fitting, luckily they didn't snap in the straightening process. Apart from the bent terminal the product quality was similar to the faulty part being replaced, and it was good value for money.

  Ease of fitting	4.0 out of 5
  Quality	1.0 out of 5
  Value	4.0 out of 5

• ICB Fife , Scotland
  4.0 out of 5

  NEFF fan oven element 11 October 2016

  Purchase and delivery easy. Fitting was slightly hampered by the electrical conections being slightly bent / damaged during transit. They were only covered by a small piece of polystyrene. All working though.!!

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• A Sampson Weymouth
  4.0 out of 5

  Does the job so far 29 September 2016

  I fitted a fan oven element in our NEFF oven 3 days ago. I had to use a round file to elongate the slot for the clamping screw, but once done fitting was straightforward. This would have been a problem for someone without any suitable tools or a workshop. I would like to report on reliability after a period of time (the OEM product lasted over 10 years). It was much cheaper than a genuine NEFF element.

  Ease of fitting	2.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• AH Dublin
  4.0 out of 5

  Oven back working again 06 July 2016

  Easy to order online and delivered within 7 days to Dublin. Instruction video on site was very helpful but ended up drilling out old rusted screws that held the front plate on. Not an original OEM part so some fidgeting to get element fittings lined up with holes in back plate but it works and oven is back burning food again. Excluding drilling it took about 15 minutes.

  Ease of fitting	3.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

• Bob West Sussex
  4.0 out of 5

  Element works fine 01 July 2016

  Element ok so far, bought it to replace main oven element on our Bosch HBN9100GB/01. Only problem encountered was that one of the preformed element mounting brackets did not align with the screw hole. Modified/bent the said bracket with a pair of pliers, it then fitted ok, made sure it didn't come into contact with the fan. Marked average on quality as will see how long it lasts.

  Ease of fitting	3.0 out of 5
  Quality	3.0 out of 5
  Value	4.0 out of 5

• Stefan Resner Guildford
  4.0 out of 5

  Works, Good Price, but not quite the good fit promised 26 June 2016

  This element was said to fit the NEFF B1451N2GB/1. When it arrived it looked the same size. However although the element and connection base were pretty close and no problem, the hole in the bracket that takes the screw that holds the furthest side of the element to the oven is not in the correct place. With the two screws that hold the connection end of the element to the body left loose it was still not possible to align the hole to take the other screw. In fact the hole could not be seen at all as it was under the bracket. The hole was about 5-7 mm out of line. I did manage to inset the screw by pulling the element towards that side and inserting the screw at an angle and pushing it to one side while turning it. The result is that although the screw holds the bracket, when fully tightened it has stripped the thread of the oven metal so screw keeps turning. If I was fitting another I would lengthen the hole in the bracket with a drill. Oven is working fine now but was not an easy fit as I would have expected for a part that was specifically for my model.

  Ease of fitting	3.0 out of 5
  Quality	4.0 out of 5
  Value	4.0 out of 5

Ratings-Only Reviews