Tricity Bendix Dishwasher Wheel Support Stock Number: ES185033

Overall rating

• Anonymous South West
  3.0 out of 5

  Does the job, but not cheap enough 24 May 2014

  My dishwasher requires 4 of these for the upper tray support, making it quite an expensive repair. It is a pity that I couldn't buy just the plastic wheels, as the rest of the fitting hadn't failed.

  Ease of fitting	4.0 out of 5
  Quality	3.0 out of 5
  Value	2.0 out of 5

• Anonymous london
  3.0 out of 5

  Fitting 13 June 2012

  I had already replaced this part and the wheels came off much sooner than the original. fitting is tricky as you have to make sure the plastic washer that the screws screw into doesn't drop down into the bowels of the dishwasher when you remove the screws. a two man job. one pressing washerin place with a long screwdriver or something similar down the gap between the inner and outer walls while the other man unscrews and replaces part.

  Quality	3.0 out of 5
  Value	2.0 out of 5
  Ease of fitting	1.0 out of 5

• Jemma Northampton
  3.0 out of 5

  Dishwasher wheel support 24 February 2012

  Fitting this needed a man (which I'm not) with strong hands (which I don't have). Struggled a bit, but got there eventually.

  Quality	4.0 out of 5
  Value	3.0 out of 5
  Ease of fitting	3.0 out of 5

• Roger Anglesey
  3.0 out of 5

  Dishwasher wheel support 30 July 2011

  Our Zanussi dishwasher is about 12 years old, and the wheel supports were beginning to slip off their spindles. So I ordered some new ones. When they came they were different to the old ones, and the wheels don't slide off the spindles. The downside of this is that you have to fit 4 new units, each containing 2 wheels. The problem is that the unit has to be screwed to a plastic item that protrudes from 2 holes in the side of the dishwasher. I succeeded in doing this for the first 3 units, but when I tried with the 4th one the plastic item fell into the cavity on the other side of the dishwasher wall. I had to get a professional to come and retrieve it for me.

  Quality	4.0 out of 5
  Value	4.0 out of 5
  Ease of fitting	3.0 out of 5

• Zebedee Bristol
  3.0 out of 5

  Dishwasher Basket Support Wheels 07 December 2008

  Care has to be taken in fitting these wheel pairs as they screw into hidden supports behind the inner dishwasher casing. If both screws are removed the support falls down and is very difficult to hold in place to refit. Therefore one screw should be removed and the other loosened enough to allow the new wheels to be loosely screwed in and then the other screw should be removed and then replaced with the new wheels.

  Quality	4.0 out of 5
  Value	3.0 out of 5
  Ease of fitting	2.0 out of 5

Ratings-Only Reviews