Fan Oven Motor 220/240V FIME 19.03.18 5422611 C20X0E01/36 32W 0r Hunan Keli YJ64 Short Shaft Stock Number: ES1331607
Spare part for select models of ovens with specific dimensions
Overall rating
Product Reviews
Write a review-
rob Whitton, Middlesex.
-
J Exeter4.0 out of 5
Does the job however... 08 April 2018
Hi guys this is a good replacement part however the spindle is 1cm longer than the original so my fan shield was touching the fan. It was offered when I specifically chose my oven. (C60EKK) I needed to use new screws and washers to bring the shield away from the new fan, also I had to use the old fan blade as the new one was slightly bent so was lopsided when spinning. I hope this helps someone out. J.
Ease of fitting 3.0 out of 5 Quality 4.0 out of 5 Value 4.0 out of 5 -
Lyndon Halifax4.0 out of 5
Did the job 21 March 2018
Bought this for a Baumatic oven, had to drill the holes bigger in the backplate to allow my existing bolts to fit through in order to fix it. Simple fix and worked fine
Ease of fitting 4.0 out of 5 Quality 4.0 out of 5 Value 4.0 out of 5 -
Joe Galway, Ireland4.0 out of 5
done the job 10 January 2018
this is a universal fan so wasn't going to be a simple straight swap but most importantly screw holes lined up perfect. To get it to fit our Nordmende oven I had to drill off the extra height at the 3 screw holes on the back of the plate and also put spacers behind the cover plate inside the oven. Not the handiest but not too big a deal either. Working perfect.
Ease of fitting 3.0 out of 5 Quality 5.0 out of 5 Value 4.0 out of 5 -
PS Scotland4.0 out of 5
It’s ok 21 December 2017
Ok I bought a universal fan and had to adjust the back plate to clear the fan. Other than that it fine and working well. Delivery was good arrived next day.
Ease of fitting 3.0 out of 5 Quality 4.0 out of 5 Value 5.0 out of 5 -
Martin Staffordshire4.0 out of 5
may not be suitable 19 November 2017
I bought this fan as a replacement for one about to fail. The fitting was straightforward until I discovered the shaft was approximately 1 cm longer than the original and the fan blades were fouling the guard. I made three 1cm stand-off tubes to mount the motor away from the backplate, using longer bolts. Works like a dream. Excellent product, but may need a little adaptation on occasions.
Ease of fitting 2.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
JP4.0 out of 5
Just what I needed 16 November 2017
The fan had stopped on my Zanussi oven and Espares had a replacement. It wasn't an exact replacement so I had to manufacture some short bolts to get it to fit. It's working fine now.
Ease of fitting 2.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
JWS Eart Sussex4.0 out of 5
Bought as insurance 29 October 2017
Difficult to rate this motor as it has been bought as an insurance for a motor that is getting a bit dodgy. The dimensions all fit the original motor replaced years ago It looks like the one best suited.
Ease of fitting 1.0 out of 5 Quality 4.0 out of 5 Value 4.0 out of 5 -
D White Huntingdon4.0 out of 5
Great Fan 25 September 2017
Great fan but required some manipulation as not a like for like part other than that it was great
Ease of fitting 3.0 out of 5 Quality 5.0 out of 5 Value 5.0 out of 5 -
Ed Greenwood Halifax4.0 out of 5
Good product but......... 08 September 2017
This is a very good product and is easy to fit despite having a number of holes through which to align the mounting screws, after all it is a Universal fan, the other mounting holes are presumably for other ovens. However there was one problem; the fan didn't turn on fitting. The problem was with the bronze bearings, they had dried up or they were too tight on the shaft and there was insufficient torque to turn. A little bit of machine oil and rotating the shaft by hand soon rectified this.
Ease of fitting 4.0 out of 5 Quality 4.0 out of 5 Value 5.0 out of 5
Ratings-Only Reviews
Overall Rating | 4.8 stars | 4.8 |
---|---|---|
Ease of fitting | 4.0 stars | 4.0 |
Quality | 4.0 stars | 4.0 |
Value | 4.0 stars | 4.0 |
Based on the average of 30 ratings-only reviews
- In Stock Available for immediate despatch
- Delivery Available About delivery
- We won't be beaten on price Price match guarantee
works but like most have issues with spindle 06 June 2018
works great. nice and quiet. bought for my Hotpoint high level oven but like most I have issue with the spindle bring too long so fan blades are touching the protection plate and had to fit 12mm spacers and longer screws. don't understand why everyone seems to having same issue and they have not addressed the problem, obviously it's not the correct fitment for so many ovens as described. however I can't complain on the price, packaging or speed or delivery as excellent.