Candy Washing Machine Door Interlock for GO614TXT-14S Stock Number: ES670687
Genuine spare part for select Candy, Hoover, Otsein, and Zerowatt washing machines
I bought Hoover Washing Machine Door Interlock for HPB145-80 from espares & followed the video, but after fitting, the washer door won’t close. It doesn’t click into place, whereas it did before. I’ve gone wrong somewhere, any ideas please? 1 Answer
-
eSpares Staff at eSpares says...
Check the position of the door lock, make sure the door does not need adjusting as the catch needs to go straight into the lock otherwise it does not connect.
How do you remove the door interlock on a hoover dxoc 68c3/1 80? New part looks like ES670687 1 Answer
No click when pressing start, door does not stay closed but very faint click after time delay after switching off so am assuming it is the door interlock.
-
eSpares Staff at eSpares says...
The door lock is held in place by 2 pips that have to be released by pushing them with a screwdriver.
Not sure if it is the door innerlock when close door it flashes saying door is locked select cycle and light s flash the door shows a lock symbol but it is not locked sometimes if i push hard onto door it will start 1 Answer
Just need advice if it is the innerdoor lock
-
Dean at eSpares says...
We believe it is likely to be the door lock.
Hi I ave a candy godf800 washing machine with error 01 coming up. Is it the door interlock that is the problem? If so will any of the ones on your site be compatible with it to replace? Thanks in advance.
-
Chris at eSpares says...
If the door opens and closes correctly replacing the lock may resolve the E01 problem. The part is listed as Stock Number ES670687
ok,but on the HPE236 there are no retaining screws and no obvious method of removal of the door interlock 1 Answer
Thanks for your original answer
-
Chris at eSpares says...
Remove the door seal from the front and press the 'pips' that push through the front panel either side of he lock hole and slide the lock hole frame away from the door. It should then hinge/lift away. To fit the new lock hook the hole frame into the front panel and hinge/slide it into position until the 'pips' lock it in place.
-
Chris at eSpares says...
This repair should be similar to one in our video: How to replace the door lock on a Beko washing machine http://www.espares.co.uk/advice/7/2310/how-to-replace-the-door-lock-on-a-beko-washing-machine-
I have just replaced hinge on door on my mums candy sprite 1300 CNA 135 but the door catch is now faulty. Do I need this part in addition to the door handle assembly part? 1 Answer
-
Chris at eSpares says...
If you have broken the handle by trying to open it before it unlocked then you may just need the handle. For more information see our videos: http://www.espares.co.uk/advice/7/1294/how-to-open-a-washing-machine-door-thats-stuc and http://www.espares.co.uk/advice/7/1278/how-to-fit-a-washing-machine-door-handle
-
Chris at eSpares says...
For information to identify the problem see our video: http://www.espares.co.uk/advice/7/1793/how-to-diagnose-washing-machine-control-and-program-problems
For a start it has no screw holes, also it seems to be magnetically operated (the old one was a pin pushed by the door catch also there seems to be nothing to hold the door shut. Yet it says it is the right bit!
- There are no screws. From what I understand from having a play about with the old one I just replaced, Its a electro magnet that pulls a pin down once the door is in the shut possition inside the lock, so the door is unable to be opened, after the washer is turned of the power is cut and the magnet releases and door is able to be opend.
Hover HNL 2126 Door Interlock
-
Rory at eSpares says...
Hi Big Al, this interlock is indeed held in place with two screws.
Will this part fit my appliance?
Check Now