Zoppas Washing Machine / Tumble Dryer Anti-Vibration Feet - Pack of 4 for PR453X Stock Number: ES654997
Accessory pack to minimise vibration and noise of all washing machines and tumble dryers
-
Chris at eSpares says...
Before you use these disconnect and check the dryer heater assembly on the top of the drum. On some LG washer dryers these can come loose and rattle on spin. Also try and balance your wash load to reduce shaking, However these feet are suitable for most makes of washing machines/washer driers.
If they are made of rubber, then it will be impossible to slide the machine out and in when they are fitted and to fit them in the first place, as I can't lift the machine high enough to get them under the feet.
-
Samara at eSpares says...
Hi Etonbird, The bottom of these feet are made out of a rigid plastic - they're not soft rubber - so they should slide a bit. There is a lip at the top of each foot which should help keep them in place. It will take a bit of patience to use them in conjunction with a fitted appliance. It would certainly be a lot easier if the appliance was freestanding.
I need to know the physical size of these items so I can be sure the machine will fit under the work surface which sits above it.
-
Samara at eSpares says...
Hi Anon, That's a very good question and I'll add the measurements to the product description above. They measure 2.3 cm in height.