Hotpoint Washing Machine Double Inlet Solenoid Valve for WMSL501PUK Stock Number: ES545716
Spare part for select models of Ariston, Hotpoint and Indesit washers
Washer starts to fill, water starts to flow in then it stops. Will do this 3 times then stops completely 1 Answer
Could the dual solenoid faulty
-
Parminder at eSpares says...
We recommend checking that the drain hose is fitted correctly with a drain hose u-bend fitting, as water can siphon back up the hose into the drum. For further information please see our advice centre article: www.espares.co.uk/advice/symptom/washing-machine-overfilling-with-water
I removed the valve checked both coils which are ok but what make the solenoid open where is supply from ?
-
Dean at eSpares says...
If you have metered the valves have a typical resistance of around 4000 ohms, check wiring from the board before suspecting the board is not supplying power.
-
Chris at eSpares says...
Inlet valves will have a typical resistance of around 4000 ohms but any reading between 2000 and 6000 is likely to confirm the coil is OK.
water valve for indesit wia 101uk...is this supplied with the rubber seals for fitment into dispenser extension 1 Answer
hi - looking for the valves for indesit WIXXL146uk - can find it with the dispenser - but can you supply just the valve unit - seems a waste of material to get the whole dispenser - thkx
-
eSparesMalindi at eSpares says...
Unfortunately the dispenser and valve are sold together for your appliance and are not available seperately.
When cold water is being taken in, at each pause of intake I get a loud judder vibration noise which resounds round the house. Very deceiving makes pipes shake is this cold water valve solenoid causing the problem ?
-
eSparesMalindi at eSpares says...
We cannot give out technical advice unfortunately. Please contact an engineer for advice.
I am trying to replace a blown valve from a Hotpoint WT960P. The part that seems to be listed for this model on various websites is incorrect as it has the water inlet in the wrong place. This part (41707P) seems identical apart from the electrical connections being in different places. Do you think it would work as a replacement? Thanks.
-
Rory at eSpares says...
Hi Matty1 The cold water valve for your Hotpoint WT960P washing machine can be found here: http://www.espares.co.uk/part/washing-machines/indesit/p/1085/805/0/0/800309/cold-valve.html Don't worry, this is definitely the right part!
Will this part fit my appliance?
Check Now