Fan Oven Motor Kit - Fime C12R0229 16W Stock Number: ES217242
Spare part for select AEG, Blanco, Electra, Electrolux, Firenzi, John Lewis, Moffat, Parkinson Cowan, Tricity Bendix and Zanussi ovens
The motor I have removed has a connector on each side, the replacement has both on the same side. Which colour wire goes where? 2 Answers
- I found the same thing and tried the wires either way and it worked fine in either configuration and the fan always turned in the same direction regardless of the configuration.
- It shouldn't matter which way round the wires go.
why has my new fan motor which i fitted to my tricity bendix cooker need a push to start? it will not turn when the control nob is turned on. 2 Answers
- my old one had got some of the insulation lagging wrapped / burned round the spindle - which led to its failure. check the motor turns freely and has nothing jammed etc when you installed it
-
Rory at eSpares says...
Hi, my guess is that the wires are not all connected properly - I'd double check what you've already done and see if you've made any errors. Of course you must remember to unplug your cooker first and let it stand for at least ten minutes so it drains of all residual power!
I have replaced the main fan motor on a Beko OIF22300X but the replacement fan was not identical to the original. I wasn't sure which way round the connections should go on the new motor. Can anyone confirm which direction the fan should rotate? 1 Answer
-
Chris at eSpares says...
This is an AC motor and therefore can only rotate in one direction no matter which way you connect the power leads to it.
-
Chris at eSpares says...
Unless the motor is running slow it is more likely to be the fan element rather than the fan.
I have a zanussi oven what should be the fan speed, as it seems to take longer to cook and I have changed the heating element? 1 Answer
-
Chris at eSpares says...
The fan should spin up quickly and run after switching off as shown in our video: http://www.espares.co.uk/advice/12/1857/how-to-avoid-a-christmas-nightmare For more information see our video: http://www.espares.co.uk/advice/1/2081/how-to-change-the-cooling-fan-on-an-oven
I have fitted a main oven fan to an Electrolux 983x. Electrical connections were slightly different. What is the direction of fan rotation? 1 Answer
Hi ! Our oven (AEG B8871-5) has started to trip the fuse box when switching off the oven - the oven operates ok and it's only when pressing the off switch it trips the switch. After some trial and error have isolated the issue to when using a mode that uses the fan. I don't think it's an element issue since get the problem when using either the top grill element or the main ring element. Also have tried the grill element with and without the fan and without the fan there is no problem. Any idea what's causing this and also what extra event occurs when switching off ? e.g. does the fan speed increase to cool off ? Thanks in advance, Richard
-
Rory at eSpares says...
Hi worthywow, I'm not exactly sure why there's a surge only when turning off the oven. The fan is only one-speed - it doesn't rotate faster when you turn the oven off. Aside from that, it's hard to diagnose without having a look! I'd advise getting someone in the know to come round and investigate.
hi i have a zanussi oven model zce7700x fan does not come on just glows would i need fan oven motor kit 1 Answer
- yes - you need a new fan motor....and quick before you blow the heating element! dont use the oven until mended. its a straightforward job the element glows because there is no fan to pass air over it - which cools the element and heats the overn
Will this part fit my appliance?
Check Now