Neff Fan Oven Element - 2300W for E1420N0/02 Stock Number: ES209572
High quality spare part for select models of Bosch, Neff, Siemens and Tecnik ovens
I have tried to gently tug and pull off the space connector from the old element, I got one of them off with no problem, but the other one is stuck! I can giggle it about a little, but it will not come off, what should be a 10 minute job has turned into 2 hours and still no joy!! I'm trying not to pull too hard as I don't want to damage any wiring, any tips on how I can get around this problem?
-
Chris at eSpares says...
Some connectors have a small 'clip' or 'barb' that prevents the connector from being removed. Carefully examine the removed connector to identify this clip and make sure it is pressed to allow the other connector to be removed.
My oven is a Bosch HBN7050GB double oven model. Trying to replace the main oven element is a problem as the fan obstructs the top fixing screw of the element. How do I get around this problem?
-
Chris at eSpares says...
Either drill new mounting holes or order the manufacturers original if available.
There are two replacement elements listed as compatible for my Neff B1451sOgb/01 oven one 2300W and the other 2500W. How do I know which to choose? 1 Answer
-
Chris at eSpares says...
We sometimes offer parts as being 'universal' this does not meen the part will be identical and fit the same as the original. We offer universal parts as they may fit eighty per cent of ovens as a direct equivalent fifteen per cent will be able to be adapted to fit and five percent may not fit at all. If the original part is available and you are not good at DIY we suggest order that part or check if a reviewer has used this part on another oven of your manufacturers appliance.
I had to grind the heads off some rusted crews holding the back panel in my Neff U1420 oven to get at the element. A very tricky operation. Now I need some new star head screws to refit the panel. Any idea if Espares do them? 1 Answer
-
Chris at eSpares says...
We do stock a number of screws from many manufacturers just try searching for 'Neff screws' to see a selection.
The item description says that an earth connector is no longer required due to UK standards, however if the wiring loom has an earth, there is this connected to?
-
Chris at eSpares says...
Trace where the earth connection is connected to and either remove it or insulate it to prevent it shorting to other components in the cabinet.
- well unless you have electrical knowledge + volt meter i think you need a qualified person to sort your problem out
I have a Neff Fan Oven B1432N0GB/06 Fan works but does not get hot. What do I need to fix pls. 1 Answer
Serial Number 5750313903
-
Rory at eSpares says...
Hi there, it sounds very likely that it is the element that needs replacing. Check out this video for help doing it: http://www.espares.co.uk/advice/cookers-and-hobs/a/1/1140/how-to-replace-a-fan-oven-element.html
You state 'due to new UK standards this part no longer has an earth connector' - so what do i do with the earth wires? Thanks Jo 1 Answer
-
eSparesToby at eSpares says...
There is a discussion currently running on the product page between people who have raised the same issue on there. There is also a helpful Youtube video showing how to install the part. However if you feel unsure about what you are doing we would urge you to contact an electrician as you are dealing with household electrics.
Guess who removed the old oven element too hastely? That's right me. Having replaced the element once before, I was too sure of myself. Now I don't remember which wires connect to which spade terminal. 1 spade has 2 wires with a blue stripe. 1 spade has 1 wire with a red stripe. 1 spade has 1 wire with a black stripe. Oven = Siemens HB91520GB/01 Can anyone tell mw the correct connection positions onto the element terminals?
-
eSparesMalindi at eSpares says...
Unfortunately we cannot give out technical advice. Please contact an engineer or the manufacturer of your appliance for assistance.
I have a worktop cooker that is not branded but the element in the picture look very similar. Thanks Jeff
- 190mm dia and 255mm approx from outside of coil to metal tag plate.
Will this part fit my appliance?
Check Now