Get The App From Play Store!

Skip to main content

Washing Machine Door Seal Stock Number: ES187254

Genuine spare part for select models of Hotpoint, Creda and General Electric washing machines

Product Q&A

Ask a Question
By tasher - - 30 July 2010
  • I would initially suggest you run the appliance on a hot wash with 1-2 cap fulls of bleach put in the soap or powder dispenser prior to the wash cycle start. If this does not help, then I would remove the seal from the appliance then steap it in a hot bleach solution. Also, with a mild abrasive scourer scrub it (green pad scourer). Personally I believe you will only achieve, at best, if it was heavily stained a mild tanish brown marking of the heavily stained area. Final answer is to replace with a new door seal. By Nos1 - Edinburgh - 29 August 2010
Answer this question
By washleak - - 25 May 2010
  • eSparesMalindi from eSpares
    eSparesMalindi at eSpares says...

    If you have any problems with orders, please contact our customer services team for further assistance. http://www.espares.co.uk/contactus.aspx

Answer this question
By Bagman - - 17 July 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Bagman, the seal for your WF430 is this one: http://www.espares.co.uk/part/washing-machines/indesit/p/1085/805/0/0/865138/washing-machine-door-seal.html - the price is at the top of the page. For help fitting your door seal, check out this advice article: http://www.espares.co.uk/advice/washing-machines/a/7/38/replacing-a-washing-machine-door-seal.html

Answer this question
By Lassey - - 16 July 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Lassey, I can't match WD530 in our washing machine or tumble dryer databases. Would you mind checking the number again? For help locating it use our guide: http://www.espares.co.uk/findingmodelnumbers.aspx#a7

Answer this question
By del1534 - - 25 June 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Del1534, this seal will indeed fit your WM62.

Answer this question

I see many machines listed WMA56 but with an additional letter - mine is just WMA56. Thank you

By Eileen - Glasgow - 17 June 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Eileen, the seal that will fit your WMA56 is this one: http://www.espares.co.uk/part/washing-machines/hotpoint/p/1085/808/0/0/187282/grey-rubber-washing-machi.html The letter on the end signifies the colour of the machine.

Answer this question
By carlito - - 28 May 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Carlito, the seal for your machine is this one: http://www.espares.co.uk/part/washing-machines/indesit/p/1085/805/0/0/865138/washing-machine-door-seal.html

Answer this question

I ordered a replacement door seal for my WD62 Washing Machine but when it arrive it was the wrong type. I seem to have oredered the wrong one but i thought it was the one in your stock, do you sell a different seal for the WD62. I will be sending the wrongly ordered one back.

By breeze - Reading - 20 March 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi, sorry to hear you ordered the wrong seal. The one you are after can be found here: http://www.espares.co.uk/part/washing-machines/indesit/p/1085/805/0/0/487822/door-gasket.html

Answer this question

will this door seal fit my hotpoint first edition machine model no wma 9. also can we fit it ourselves

By babs0713 - - 01 March 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi, the seal for your WMA9 is this one: http://www.espares.co.uk/part/washing-machines/hotpoint/p/1085/808/0/0/187282/rubber-washing-machine-do.html

Answer this question

Will this part fit my appliance?

Check Now

Washing Machine Door Seal

75.73
(inc. VAT)
75.73