Black & Decker 3.6V Lithium Screwdriver Stock Number: ES1742389
Powerful 5.5Nm of torque provides ample force for all your screwdriving tasks.
-
Chris at eSpares says...
This product is no longer available with screwdriver bits supplied
- Exactly as D E W said, no screwdriver bits were supplied except for a short hex 'reduction' bit that fits no screws that I've come across!
- The photograph appears to show a standard length screw driver bit on the magnetic holder on the top of the driver. No screw driving bits supplied with mine but strangely a short hexagon bit was!
Have you actually tried to fit the angled attachment to the screwdriver, if so how did you do it ? 3 Answers
- I think the first line of the first answer above should be altered to "... take the black rubbery collar off the driver first ...".
- I've used it. take the black rubbery collar of the driver first, and any bit. Look in the angel attachment and see the 2 location springs, hold the attachment in one hand and pull the collar forward and slide the driver in to locate the springs. The > < marks on the attachment should be top and bottom of the driver. When together if you have your hand over the attachment pull the collar in and rotate until it locks in the position you want. Rotate until the > < marks are to and bottom and it will drop off.
-
Chris at eSpares says...
We think the attachment has a collar that if pulled towards the tool tip will allow the attachment to fit onto the drill. Once the collar is released it should lock onto the drill.
I note that your pics do not show the right side of the drill so left handers like me cant tell if this drill is suitable or not. If there is no button on the right side of the drill you should state that this is only suitable for right handed people. Does it have a right side button as well?
- The push through button controls the rotation. Central position locked, no rotation (only led light). Fully one way clockwise rotation, Fully other way anticlockwise rotation. Suitable for either hand.
-
Parminder at eSpares says...
This screwdriver has a button on the right side.
-
Dean at eSpares says...
According to the Balck & Decker information it has 8 pivoting positions which is on our website.
Does it have an electronic brake so the bit stops rotating immediately you release the trigger? 1 Answer
-
Dean at eSpares says...
This product has no information regarding an electronic brake in the technical data.
-
Dean at eSpares says...
The charger is plugged into the mains to charge the product, 240v
-
Chris at eSpares says...
This device is not designed to have the batteries replaced.
-
Chris at eSpares says...
This is supplied with only one bit, a suitable kit of additional bits will be shown as a 'buy together' option when purchasing this part.