Beko Tumble Dryer Light Guide Set Stock Number: ES1568162
Genuine spare part for select models of Beko tumble dryers
I have put it back together without the light guide but I have 1 / 3 wire plug in control panel which I cant see where it plugs in
- It connects to the small board that connects to the large round control knob. At the top end of the board you will see small slots in the board. It clips in here. There is no socket as such as all other plugs have. If you first plug in the larger plug that is taped to this wire the resulting length of wire will guide you to the position.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
I have fitted a new light guide put everything back correctly but now the water tank light and the filter lights keep coming on when I try to start machine 1 Answer
-
eSpares Staff at eSpares says...
Check the light guide is fitted correctly if you have checked the tank and filter.
After watching a video on YouTube they gave the part number of P22H40 is this thet right part ? 1 Answer
-
Chris at eSpares says...
P22H40 is not a Beko part number but we believe this is the part you require, confirm this with your model number.
-
Chris at eSpares says...
To fit this part you need to remove the control board from the front fascia panel.
The start/pause/cancel button is stuck in on my DCU8230. I did manage to get it working a few times when it was a bit wobbly but now its stuck in and wont start up - which part/s do I have to replace? 1 Answer
-
Dean at eSpares says...
Dismantle and check as buttons can get stuck from spilt liquids, Carefully clean with a soft damp brush. If the light guide is broken it should be replaced.
HI - my stop start button is jammed in on my Beko dryer DCU7230W. To fix this, do I need the light guide set or something else? THanks 1 Answer
-
Chris at eSpares says...
Dismantle and check as buttons can get stuck from spilt liquids, Carefully clean with a soft damp brush. If the light guide is broken it should be replaced.
Need the button as well. Can you tell me if you stock it please
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
I have just replaced the light guide on my DCU8230 condenser dryer but cannot remember the order in which to reconnect the terminals of the on/off switch to the corresponding wires - unable to find tech info on this. Don't want to damage the electrics/circuit. Really frustrating - anyone help?!
-
Chris at eSpares says...
Trace the two wires from the filter to the switch and connect them one to each side of the switch. With a resistance meter Stock Number: ES1583041 measure across the live and neutral and operate the switch. If you have connected the input incorrectly the switch will create a short but if no short is found connect the other two wires check again that no short occurs then retry with the power re connected.
Hi the button for start pause made a crack sound, think I pressed it a bit hard and it seems to be pushed in now. If I keep presses hard on the button it comes on so the dryer is worksing but I would say i have cracked the button - would this part be what i need to fix and if so is it easy to do?
-
Chris at eSpares says...
It stands a good chance that this may be broken listening to your fault description. Examine it to confirm the damage before ordering, To dismantle disconnect and remove the top. Slide the polystyrene from the bracket on the control panel and use a flat bladed screwdriver to prise off the bracket. then remove the three control board screws and un-clip the control panel from the front. Then remove the board from the control panel.
could you tell me if this is the item that clips behind the control panel that holds the start/pause button and the buzzer button in place 1 Answer
tumble dryer model DCU8230. the problem is the small plastic return on the start button has broken and the button wont work. thanks, jim
-
Chris at eSpares says...
It sounds like this is the part you require. It is made of clear plastic to transmit light to the front and to hinge the buttons between the facia and the board.
Will this part fit my appliance?
Check Now