Beko Fan Oven Element - 1800W for ODF22300X Stock Number: ES1504348
Spare part suitable for select models of Arcelik, Beko, Blomberg, Grundig and other brands of ovens
The fan on my oven is still working although emits a tinny noise but it does not heat up. Is it the element or are there other factors 1 Answer
the rest of the cooker is working fine. i.e. grill and hob
-
Chris at eSpares says...
For information on your repair see our video: How to diagnose problems with your oven: www.espares.co.uk/advice/1/2145
-
Chris at eSpares says...
For information on your repair see our video: How to diagnose problems with your oven: www.espares.co.uk/advice/1/2145
Will this item fit the main oven. What are the hole centres on the fixing bracket ?
-
Chris at eSpares says...
The correct part for your oven is Stock Number: ES555487
top is working,gril is working.main oven ,the ligth goes on but dont warm up wath can be the foult 1 Answer
-
Chris at eSpares says...
For information on your repair see our video: How to diagnose problems with your oven http://www.espares.co.uk/advice/1/2145
My oven's model number is OIF22300X
-
Chris at eSpares says...
As long as it physically fits it will work correctly but take a little longer to heat up.
I have a BEKO OIF 22300X - the grill works but oven fails to warm & blows out cool air - which heating element do i need please ? 1 Answer
-
Chris at eSpares says...
It is likely to be the fan element but see our video: How to diagnose problems with your oven http://www.espares.co.uk/advice/1/2145/how-to-diagnose-problems-with-your-oven
but where there should be three screws holding it in place there is only one and what appears to be two welded in pins. Can anyone give me some advise on how I can get this out without spending a fortune on it
-
Chris at eSpares says...
The pins you are looking at are the heads of bolts that go through to the back of the machine where small nuts hold the element in place. To remove these nuts you will need a socket set similar to Stock Number: ES1584151.
grill works oven fails to get warm blows out col air only
-
Chris at eSpares says...
Check if the indicator light next to the control is lit. if this remains lit it suggests a faulty element, You may see signs of damage on the element. You can confirm this by using a meter and measuring the element.
the element dosent have any screws in the front does this mean its screwd in from the back? 1 Answer
- Yes there are two screws on the rear of the oven, You just unscrew the rear panel, disconnect the two connectors and unscrew the element. REMEMBER TO TURN OVEN OFF AT MAINS SWITCH.
Will this part fit my appliance?
Check Now