Smeg Cooker Hood Vent Kit - 150mm for KS12XSE Stock Number: ES1431181
Universal venting kit for cooker hoods with a 150mm fitting
and if so can I purchase another length of duct
-
Chris at eSpares says...
If your hood has a 150mm diameter hose connection this kit would be suitable and can be extended using Stock Number: ES1431559
Will this vent kit fit a belling100db flat From the top of the hood along and over the top of a 1200 wall unit out into the same wall which is an external wall. Thank you
-
Chris at eSpares says...
The total length of hose is 1.5 metres in a straight run. Bending will reduce the usable length so it may not be long enough.
-
Chris at eSpares says...
This will be suitable if your cooker hood has a 150 mm (6 inch) diameter outlet spigot.
-
Chris at eSpares says...
This will be suitable if your cooker hood has a 150 mm (6 inch) diameter outlet spigot.
-
Chris at eSpares says...
If your hood has a six inch or 150 mm fitting this duct and kit will be suitable to fit.
-
Chris at eSpares says...
This should be suitable for any 150 mm (6 Inch) ducting but you may require an adapter on the hood if it has not got a 150 mm mounting spigot.
We have a Diplomat Elite AAA2390 cooker hood, internal filter. Will this venting kit, fit on top somehow, for external extraction? 1 Answer
We do have a vent hole already in the outside wall. This was previously used for a boiler but the boiler has now been moved in to our loft. kind regards M Barber
-
Chris at eSpares says...
Check your hood has the adaptor Stock Number: ES1394363 to fit onto the ducting and if it measures 150 mm across then it should be able to fit onto it.
-
Chris at eSpares says...
This will allow any hood (subject to installation) with 150 mm connection to be externally vented .
Do I need to purchase this accessory to vent this Hotpoint Chimney Hood?
-
Chris at eSpares says...
This will allow any hood (subject to installation) with 150 mm connection to be externally vented .
Is this suitable for an Electrolux Island cooker hood? Vented through ceiling cavity to exterior wall 1 Answer
-
Chris at eSpares says...
This could be used but only has a duct length of 1.5 metres. It is likely you will need more than this.