Universal Washing Machine & Tumble Dryer Stacking Kit With Shelf Stock Number: ES1431045
Replacement stacking kit for appliances up to 60 x 60cm maximum width
-
Dean at eSpares says...
This is a universal kit. we do not have a list of appliances that it is confirmed to fit. It should be suitable for most appliances that are 600mm wide.
-
Dean at eSpares says...
Universal kits are designed to allow the stacking of many different appliances as long as the width does not exceed 600mm, it may not be ideal with a dryer that has a higher depth than the washer as you will get some overhang at the back so it would not support a very heavy dryer.
My new washing machine is smaller in depth than my tumble dryer. The washing machine depth is 400mm and my tumble dryer is 600mm. Will this kit be suitable? Also, will it prevent me from opening the dispenser drawer? The Hoover model is: Dx c4 c4 7 w1. 1 Answer
-
Dean at eSpares says...
Universal kits are designed to allow the stacking of many different appliances, it may not be ideal as you will get some overhang at the back so it will not support a very heavy dryer. As it does not have a rigid front lip it will usually allow the detergent drawer to be opened.
It says the width must be between 56 - 60cm. In terms of depth must it be 60cm, or can it accommodate shallower washing machines / tumble dryers? I have a 58cm (depth) Hoover tumble dryer to be stacked on a 56cm (depth) Washing machine. Will this be ok? 1 Answer
-
Dean at eSpares says...
It should be suitable as it fits all appliances up to the maximum 60x60cm
How does one use the powder/tablet/conditioner drawer usually located at the top left of a machine with this stacker kit on it? 1 Answer
Washer is a zwh6120p. Zanussi have been very unhelpful so far, saying they need to know the type of tumble dryer before they will answer and it has to be one of theirs. If that was true why would anyone manufacture a universal kit?
-
Chris at eSpares says...
Universal kits are designed to allow the stacking of many different machines but may not be suitable for all appliances. This kit has rigid side lips that help hold 600 mm wide appliances together with the help of the strap. As it doe not have a rigid front lip it will usually allow the detergent draw to be opened.
-
Dean at eSpares says...
It is important to note that due to the weight of the washing machine the freezer would not support it, there may be other issues with the freezer being on top as the freezer door may catch when opened.
Hello I'm interested in a stacking system, but I need to limit the total width taken up in a cupboard we're having built. This tightening mechanism looks like it will add width to the sides, but can this be fastened on the top of the tumble dryer? If so what is the total width of the system and can it be fitted inside the cupboard?
-
Chris at eSpares says...
We would suggest you allow a minimum of 5cm on either side of the appliance, the fixing strap can be fitted on the top if required.
Just purchased WPRO Stacking kit. Connected as per the video and washing machine is on stable floor and strap is tight but dryer makes massive noise when being used. Have whirlpool washer and beko 7kg dryer on top both 60 wide and fits ok. Any suggestions?
-
Chris at eSpares says...
We have some 'soft feet' Stock Number: ES654997 that may reduce noise transmitted or you could use a foam draught excluder strip to fit on the contact areas of the machines.
I want the added security of the tumbler dryer not vibrating off the worktop and the shelf would be a bonus.
-
Parminder at eSpares says...
We believe this would not be suitable for use on a worktop.
Will this product be suitable to stack a dryer with measurements 57cm wide x 46cm deep?
-
Chris at eSpares says...
We believe it should be just about wide enough to stack safely on this kit.