Universal Washing Machine & Tumble Dryer Stacking Kit With Shelf Stock Number: ES1431045
Replacement stacking kit for appliances up to 60 x 60cm maximum width
Reviewers have posted that it comes with a strap to secure the stack. Your answer to one question raised by a potential customer suggests this is not the case and your answers to other similar questions suggest buying ES1642834. So I'm confused! Simple question, does ES1431045 come with a securing strap or not: Yes or No?
-
Chris at eSpares says...
Yes this should come with a fixing strap.
Both appliances are the same width, but from different manufacturers. The condenser dryer instructions also say not to remove the feet, but does mention it can be stacked on washers from the same manufacturer of depth 48cm to 60cm
-
Chris at eSpares says...
It is not advisable if the feet are not removed and they support the machine on the kit and not transmitting the weight onto the top of the supporting appliance directly.
-
Chris at eSpares says...
Some manufacturers do not recommend stacking a condenser dryer presumably due to the increased weight. However this should not normally be an issue and therefore should be suitable in our opinion.
Someone else has already asked this question but the video shows your man clearly using a strap to secure the two appliances. He says this is required for safety but your answer to the question posed by another user says that the strap is not required. I am confused, please can you clarify if the strap is necessary and also if it is or is not included in the kit. Thanks.
-
Chris at eSpares says...
Many people do not 'tie down' the appliances but if no strap is supplied order Stock Number: ES1642834 as this is more than adequate to hold both units together. (Be careful not to over-tighten the strap).
Just looking to find the stacking kit used in the video used for this product. It comes with a strap, racket and the appropriate spaces to secure everything in place, but it doesnt look like this one does?
-
Chris at eSpares says...
This is the kit used in the video but it is possible minor production changes have occurred.
Hi, I have a 60 x 60 washer and I want to stack my dryer on it which is 60(W) x 50(D). I'm assuming that this kit would not be suitable. Is there another stacking kit that would be suitable? Thanks 1 Answer
-
Chris at eSpares says...
This should not be a problem if the washer is on the bottom and dryer above.
-
Chris at eSpares says...
This is not supplied with this kit and should not normaly be required. If you are concerned about this you could obtain a ratchet tie down strap Stock Number: ES1642834 and use this to lock the two together.
-
Chris at eSpares says...
It is probably not recommended to use with a smaller 'base' but I would try it if space was required.
-
Chris at eSpares says...
This is suitable for most appliances that are 60cm by 60cm.