Get The App From Play Store!

Skip to main content

Universal 4-Sided Oven Door Seal Kit - 2m (For Square Corners) Stock Number: ES131929

Cut to size door seal suitable for select sized ovens

Product Q&A

Ask a Question

Will this fit a stoves newhome550Si DLm not sure if that correct it could be 55051 Dlm thank you

By mbob - LEEDS - 03 March 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi, this seal will fit on all domestic Stoves cooker

Answer this question
By ianb - - 22 February 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi, this can fit on either the door or oven proper, wherever your model's seal in placed.

Answer this question

The seal around my Tecnik oven (model 195/3) is just stretched into place and not held with clips. Would I be able to glue this universal seal on instead?? Thankyou for your advice

By wendylou - - 16 February 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi, you can give glue a go, I'd recommend this stuff: http://www.espares.co.uk/part/cookers-and-hobs/p/1092/0/0/0/914819/glass-sealant---310ml.html

Answer this question

if not what kind of glue do i need to fit this? because in the model we have (EKC6049x) the metal clips on the seal are glued to it. thanks

By punkchef - northampton - 05 January 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Punkchef I think user Dadio34 answers this one best so I'll quote him on this: 'You need to cut and angle rubber to size. If clips don't fit corners then you need to drill your cooker. Simple job just take time to measure out.'

Answer this question
By diymug - - 03 January 2009
  • No you need to cut and angle rubber to size if clips dont fit corners then you need to drill your cooker simple job just take time to measure out By dadio34 - west midlands - 05 January 2009
Answer this question

Should the seal drop in the middle when the oven gets heated?

By simo - - 02 January 2009
  • If your seal drops you could have not cut length short enough so there is not enough tension hence the heat will cause the rubber seal to expand and sag By dadio34 - west midlands - 05 January 2009
Answer this question

This oven door seal has slightly rounded off corners and the seal doesn't meet at the bottom. There are also two side seals on the outer edges of the cooker casing. Including these two side seals the length of seal required appears to be approx 2.5m. There are four corner clips and six end clips required too.

By CazW - - 01 January 2009
  • The corners are the same as mine the clips will not fit so i drilled my cooker in corners to allow clips to fit By dadio34 - west midlands - 05 January 2009
Answer this question
By jewels - - 31 December 2008
  • You will likely have to drill your cooker to accept the clips a good guide comes with pack By dadio34 - west midlands - 05 January 2009
Answer this question

Will this fit a Stoves EC500DOa electic cooker. Already had the wrong part delivered elsewhere. Your help please. The seal is for the 500mm model.

By braveheart - - 20 November 2008
  • you will have to cut rubber to size and drill your cooker so as to take clips a simple diy job By dadio34 - west midlands - 05 January 2009
Answer this question

How is it fitted ?

By Stud - - 07 November 2008
  • Rory from eSpares
    Rory at eSpares says...

    Hi Stud This door seal is universal; it will work with any domestic oven. It is simple to fit, you just cut the seal down to size and fit in to the door using the clips provided. Easy peasy!

Answer this question

Universal 4-Sided Oven Door Seal Kit - 2m (For Square Corners)

10.16
(inc. VAT)
10.16