Privileg 9 Piece Chrome Alloy Steel Torx Head Screwdriver Set for 020.501 3 Stock Number: ES1251179
Comprehensive satin finished chrome alloy torx kit with a two way handle suitable for various applications
- OK, T20 worked :)
- I just bought T25 and it didn't fit on Bosch, T20 looks like too small :(
-
Chris at eSpares says...
We believe most Torx's screws used are either T15 or T10 sizes.
- 2.00mm
- Long length - 11cm Short length - 2cm
- T20 is approx 9cm in length (10cm inc the curve) not sure what oyu mean by needing a star head screwdriver, these are like allen keys.
-
Dean at eSpares says...
There is a recess in the handle where the tool clips in.
-
Dean at eSpares says...
We believe it should be a Torx screwdriver that is required.
The brush bar has stopped rotating and I want to check if the belt needs changing, but can't unscrew the metal plate with the screwdrivers I have.
-
Dean at eSpares says...
This item will be suitable if the screws are Torx, check the head of the screw to identify if it has a 6-point star-shaped pattern that identifies the Torx screw.
I need a Torx head driver to remove the screws on the casing of a Karcher pressure washer. It needs to be at lease 90mm long. I do not know what size the Torx head is. It may be T10 or T15. What advice can you offer ? Thank you.
-
Chris at eSpares says...
This kit contains both T10 and T15 sizes and all shafts are over 100 mm long.
I have a 4mm and a 3mm hexagonal head screwdriver. Once is too big, the other too small.
-
Parminder at eSpares says...
We do not have information on your specific model, however if it is a torx screw that needs removing then this kit should be suitable.
The product images suggest the set is suitable for security torx screws, yet one of the answers to a question suggests they are not suitable. I am therefore confused and unsure.
-
Chris at eSpares says...
Yes, Also see Stock Number: ES1525124
I need to take the back panel off the main oven of my Neff cooker, in order to change the element. The screws seem to have a 5 star head.
-
Chris at eSpares says...
The screws should be standard Tork screws and Stock Number: ES1251179 should be suitable to remove them.