Creda 28W E14 T25L Cooker Hood Bulb for CRC65 Stock Number: ES103324
Universal cooker hood lamps designed to fit many different cooker hood models
Both bulbs on my Stoves cooker hood have failed, been replaced but still not working. Could the light switch that have failed somehow. Is this likely? 3 Answers
The bulbs failed so replaced both with genuine bulbs but neither work in the hood. The fan and controls etc work but not the lights. I have checked the bulb holder contacts and pulled the contact plate up but still not working.There is not much more to go wrong with the bulb holder. I assume that it is likely to be the light switch that has failed somehow. Is this likely?
-
Chris at eSpares says...
You will need to check the continuity of connections from the switch to the power connection and through to the lamps and motor. Remember to disconnect first before working on it.
- There are no obvious 'witness marks' where blackening has occurred.
-
Chris at eSpares says...
The switch may be OK but the board that the switch is on may have been damaged if the bulb went short circuit. Examine the switch assembly for 'witness marks' where blackening has occurred from damage.
The bulbs and on/off switch in my Neff cooker hood not working. Reading you website believe this could be a fuse. Where is that located please ? 1 Answer
-
eSpares Staff at eSpares says...
Most cooker hoods are hard-wired so will normally have a fuse in the socket to isolate the power, if yours has a plug it will be inside that.
-
Chris at eSpares says...
In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
My bulbs blew and now I have no power in hood at all, is it likely to be a fuse that's blown as a result? 1 Answer
-
Chris at eSpares says...
There is a high chance of the hood having a fuse that has blown.
The glass cover over the light bulbs in my Howden cooker hood has broken. Where can I buy a new one? 1 Answer
-
Chris at eSpares says...
To help us identify the part you require please fill in the details on the form found by using the 'Help Me Find The Part I Need' link at the bottom of the page.
-
Kaasim at eSpares says...
Unfortunately we are unable to provide the dimensions of this part. The parts listed on our website are all model and serial number dependant (apart from universal parts). In order for us to locate the correct spares for your appliance we would need the model information requested. Without this we cannot guarantee that the part ordered will be the correct one for your appliance.
Both bulbs on our Rangemaster 90 hood blew at the same time with a crack when I switched the light on. Should I just replace them or does it indicate some kind of short circuit? 1 Answer
-
Chris at eSpares says...
It is likely to be the bulbs as this cannot be due to a fault on the hood itself.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Both my light and my extractor fan are not working. I switched the light on last week and heard the bulb blow. I can replace the bulb but cannot find where the fuse is for the fan. Can you help me please?? 1 Answer
-
Chris at eSpares says...
There is likely to be a fuse where the extractor is connected to the wall either on a plug or in a fused switch. If there is power at the wall it may have blown print on the switch-bank itself as this can happen with excess current.
We have a hygenaApp 2102 and have purchased a bulb from you. How do we get to the unit holding the bulb to replace it. 1 Answer
-
Chris at eSpares says...
We do not have any exploded diagram for your hood but believe it is going to be a similar repair to: How to replace a cooker hood filter http://www.espares.co.uk/advice/6/1139/how-to-replace-a-cooker-hood-filter
Will this part fit my appliance?
Check Now