Hotpoint Tumble Dryer Drum Shaft Kit for TDC30YS Stock Number: ES101580
Genuine spare part for select Ariston, Creda, Hotpoint and Indesit tumble dryers
-
Chris at eSpares says...
Yes, it is shown in one of the other images on the part.
There doesn't seem to be a "grinding noise" as though there is a problem with drum bearings or similar issue. The drum doesn't seem to have any "play" in it when turning. Any advice would be most appreciated.
-
Chris at eSpares says...
Remove the cap of the bearing at the back of the machine where you are likely to find a lot of black dust and the bearing worn. See the attached video on how to do this.
I need a drum shaft/bearing for indiset is60v(UK) Regards
-
Chris at eSpares says...
The correct kit for your drum should be Stock Number: ES1672507
-
Christopher at eSpares says...
The problem is almost certainly the bronze bearings worn (remove the small cover at the rear to access) these wear leaving a black graphite type powder. It is a good idea to replace all the parts in the kit as these are the main wearing components.
My hotpoint condenser dryer makes a grinding noise when working, what might be causing this? 1 Answer
-
Chris at eSpares says...
It is likely that the rear bearing or the belt pulley will be worn and require replacement.
give a push it starts again!
Will this part fit my appliance?
Check Now