Zanussi Washing Machine Drain Pump for ZWF1431W Stock Number: ES100516
High quality replacement spare part for select models of AEG, Zanussi, Electrolux, John Lewis and Siemens washing machines
-
Chris at eSpares says...
This is suitable for most Bosch machines. In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
-
Chris at eSpares says...
This may well fit your appliance but we will only be able to confirm the original Bosch part. If the connectors and the design of the pump matches the one removed then it should be suitable.
-
Chris at eSpares says...
This may fit the pump housing but it is not listed as a direct replacement and the connection plug may not fit.
Hiya would this part fit a Zanussi ZWF1640W, if yes I will order asap or no which is the correct one to order. 1 Answer
The machine fails to wash, i removed loads of stuff from the Pump and it sometimes work. When trying to start up the machine I can hear a noise from the pump area.
- My Bosch started the wash cycle OK but made a distinct noise when commencing a pump out. Examining the pump, in my case, showed the impeller had detached. I pushed it back onto the shaft but this did not improve matters.I don't think this caused the noise. If this is the right pump for your Zanussi nothing could be easier to change the pump and is not expensive either. (just about as easy as changing a light bulb, no screws etc just a bayonet fitting)
Will this fit a Bosch WFX148SGB/ ...not sure of the two numbered variant but on most websites the same pump is shown for all. Cheers, 1 Answer
-
Caitlin at eSpares says...
For that Bosch model you'll want stock number ES1087464
-
Rory at eSpares says...
Hi Stueyboy, the pump for your washing machine is this one: http://www.espares.co.uk/part/washing-machines/zanussi/zwd1252w/p/1085/332/0/951386/564050/drain-pump-kit.html
I have a Galley GLTR1670A washing machine. It uses a Askoll Model M66 pump. It looks similiar to the one listed. Will this work for my machine?
-
Rory at eSpares says...
Hi Dirt1bike As GLTR1670A is an American model we do not stock pumps for it. Sorry!
Will this part fit my appliance?
Check Now