Hotpoint Compatible Dishwasher Heating Element - 2040W Stock Number: ES551432
High quality compatible spare part for select Ariston, Hotpoint and Indesit dishwashers
Manufactured by Electruepart
(This part fits select Hotpoint models)
Will this part fit my Appliance?
Check this part fits your appliance
High Quality Replacement Dishwasher Heating Element - 2040W
If the water inside your dishwasher is not being heated properly, you may have a faulty heating element on your hands. Don't despair though - this spare may just be what you need to have your dishwasher back at full function again.
With this replacement heater from eSpares, you could soon restore the water temperature and get great cleaning results with sparkling dishes and cutlery on every wash.
Note: Many dishwashers use hose clamps that cannot be undone. It may be possible to prise the hose off the end of the heater or pump without undoing the hose clip. Then by applying a little washing up liquid to the inside of the hose, you may be able to push the hose and clamp over the new heater or pump or order hose clamps when ordering the heater element.
Specifications:
- Type: Flow-Through
- Wattage: 2040W
- Voltage: 230V
This totally tubular heating element is a compatible spare part and will fit select models of Ariston, Hotpoint and Indesit dishwashers.
Please check models this fits prior to ordering to make sure this element is right for your dishwasher.
14 Questions and 12 Answers
Machine stops during cycle, water is being heated. So dont think it's the heating element. Is it overheating or is the thermistor faulty / control module?
-
Chris at eSpares says...
For information to diagnose your problem see our video: How to Diagnose Washing Machine Control and Program Problems www.espares.co.uk/advice/7/1793
water does not get hot end of wash leaves grainy residue on dishes and no steam comes out of machine also delicates light flashes at end of cycle hotpoint aquarius fdw60g model 1 Answer
-
Chris at eSpares says...
For information on this problem see our diagnosis video: How to Diagnose Dishwasher leaking and heating problems http://www.espares.co.uk/advice/3/2083/how-to-diagnose-dishwasher-leaking-and-heating-problems
I had a powersurge/powercut when the dishwasher was on. when power back on and my RCD reset the machine is flashing lights 2 and 4. When powering off and on I can reset by holding button P. The machine sounds like it is draining but then stops with lights 2 and 4 flashing again. A google search suggests this is the heater. help please
-
Chris at eSpares says...
If the error lights suggest a faulty heater you should check this and replace if required as the machine may stop if it detects a fault.
-
Chris at eSpares says...
See our diagnosis video: http://www.espares.co.uk/advice/3/2083/how-to-diagnose-dishwasher-leaking-and-heating-problems
the fault on my arisen bfi680 is that it finishes mid way through cycle with the 6th light flashing. the water feels warm but i wonder if it's not hot enough.
-
Chris at eSpares says...
We believe the 'fault code' showing on your control panel is indicating that the machine does not think it has heated correctly. The element resistance is correct and not likely to be the problem. Check the wiring and control board for signs of burning or damage and replaced the board if required.
Will this part fit my appliance?
Check Now
