Get The App From Play Store!

Skip to main content

Tumble Dryer Start Switch Stock Number: ES539048

Genuine spare part for select Ariston, Creda, Hotpoint and Indesit tumble dryers

Read more

Manufactured by Indesit

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Tumble Dryer Start Switch

If your start switch on your tumble dryer has become worn or faulty over time, with help from eSpares and this fantastic replacement you'll have your tumble dryer running again. Once fitted, your tumble dryer will be back to its optimum performance.

Genuine spare part for select Ariston, Creda, Hotpoint and Indesit tumble dryers. 

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Ask a Question

9 Questions and 9 Answers

By Gillian Lloyd - Chorley - 04 June 2017
  • Dean from eSpares
    Dean at eSpares says...

    It is likely to be the switch but you will need to examine both before deciding what part is required.

Answer this question

start button for indesit tumble dryer

By booth denis - leyland - 29 April 2016
  • Chris from eSpares
    Chris at eSpares says...

    If the machine only runs when the button is pressed suspect the door lock Stock Number: ES552148 as this switch is not supposed to latch and the problem is likely to be the lock.

Answer this question

I have purchased a replacement start switch, but the video does not relate to my dryer. Please explain how to replace switch.

By David Moffett - Wokingham - 29 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    We are sorry but this is the closest video we have to your repair. To release the switch carefully prise off the button using a couple of small screwdrivers. Then use need nose pliers to press in the 'arrow heads' on the switch until it can pass back through he mounting hole.

Answer this question

just replaced the start switch but problem is the same as before, the start switch only functions if the switch is held in but the machine functions perfectly until you release the start switch.

By mike - Devon - 02 December 2014
  • Chris from eSpares
    Chris at eSpares says...

    Depending on your 'version' this problem is likely to be the relay PCB Stock Number: ES865631 behind the top panel or the door lock Stock Number: ES552148 if no relay is fitted (later models).

Answer this question

My old start switch, when I push it in power comes on but when I let go power goes off. I've replaced the switch but the same happens so espares have sent me another switch which does exactly the same. The switches are not clicking and just springing straight back out. Am I doing something wrong or is it possible that the 2 switches I've been sent are faulty?

By Bagy - Birmingham - 13 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    These switches contact momentarily and then release. This depending on model activates either a relay, door lock or control board that starts the machine.

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Tumble Dryer Start Switch

15.79
(inc. VAT)
15.79