Wellco 2-Blade Heat Powered Stove Fan - Black Stock Number: ES1679021
The F501 Stove Fan will make your stove more cost-effective providing even heat distribution
Manufactured by Wellco
(This part fits select models)
Heat Powered Stove Fan - Black
Efficiently circulates heat, produced by your stove
Thermoelectric motor - generates its own power
Reduces fuel consumption & maximises heat output...
If would you like to be able to save on your energy costs, you can do this by increasing the efficiency of your stove! With the help of this Wellco thermoelectric stove fan, you will be able to increase your level of comfort.
The heat generated from the burning wood will be circulated and then distributed evenly throughout the room. What's more, you can relax in near silence - as this heat powered fan runs on a near silent operation!
Specification:
- Model: WELF501
- Thermoelectric motor - requires no mains electricity or batteries
- Fan speed automatically increases as stove temperature rises, and slows as the stove cools
- Increased Airflow: blade design has been developed to produce a very broad cross-section of gentle air movement
- Near silent operation
- Zero running costs
- Colour: Black
- Dimensions: 210 mm High, 130 mm Wide, 80 mm Deep, 205 mm Fan Width
- Designed to be operated between 65°C and 345°C (150°F and 650°C)
24 Questions and 25 Answers
I have frigidair gas cooker with no inside the oven .. dose it fit inside the the oven to produce circulated heat 2 Answers
- This unit works on temperature difference, contact with the stove and with cooler air, therefore it will not work in an oven where there is no temperature gradient.
-
eSpares Staff at eSpares says...
It is designed to fit on the top of the stove on a smooth flat surface on your stovetop near the side or back of the stove where cooler air can be drawn from behind and over the cooling fins.
I have a coalagas fire and all the heat seems to go to the chimney back and not into the room, it is a period fire grate and has a wide flat ledge either side and I thought maybe I could stand it on there. 1 Answer
-
eSpares Staff at eSpares says...
It is designed to fit on the top of the stove on a smooth flat surface, it is not designed for a gas fire.
-
Hamza at eSpares says...
This should be suitable for a coal burner stove as this unit works from the conduction of the heat from the stove. The fan has a small chrome wire handle that should allow it to be lifted off safely even if hot.
My stove is an insert which is about 4 inches out from the wall. would the fan sit on that space. Thanks
-
Parminder at eSpares says...
As long as space you are sitting the fan on matches the dimensions listed in our product description, it should fit.
-
eSpares Staff at eSpares says...
No, as it is designed to operate on a stove burner.