Get The App From Play Store!

Skip to main content

Fridge Freezer Sensor Replacement Kit Stock Number: ES1641924

Genuine spare part for select models of Beko, Blomberg and Grundig fridge freezers

Read more

Manufactured by Beko

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Fridge Freezer Sensor Replacement Kit

If you need to replace the sensor in your freezer compartment that is located behind the defrost heater,  then this spare part from eSpares could be just what you need to complete the job.

Genuine spare part for select models of Beko, Blomberg and Grundig fridge freezers.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Ask a Question

3 Questions and 4 Answers

Refrigerator section is freezing & compressor is running continuously

By Brian Westgarth - WALLSEND - 16 May 2018
  • No there is only a small PCB in the light compartment. The sensor has to be located by cutting the rear insulation below and to the side of the main PCB at the back. There is a good video on U Tube By Paul Gregson - Newark - 11 December 2018
  • Dean from eSpares
    Dean at eSpares says...

    Check the rear wall spacers are fitted as they need to be 5.5cm min according to Beko, also check if the accumulator in the freezer is icing completely. Test the thermostat & connections before suspecting anything else.

Answer this question

Top half of the fridge compartment forms a frost layer and will not defrost. Salad items and dairy freeze solid. What is wrong and how do I fix it.

By Michael Bailey - Weymouth - 05 December 2018
  • Parminder from eSpares
    Parminder at eSpares says...

    Please view our advice centre page which will give you more information on this issue, www.espares.co.uk/advice/symptom/my-fridge-freezer-is-over-freezing

Answer this question

I have replaced the thermostat and the PCB and the unit is at least 10cm away from the wall. The unit was transported on its side in a car carefully, and stood over a weekend before switching on. It has not worked since.

By Stephen Murgatroyd - Cornwall - 17 July 2018
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    If the appliance has not been transported on the correct side there is a potential to get oil in the system, check the accumulator in the freezer is icing and check the thermostat connections before suspecting anything else.

Answer this question

Will this part fit my appliance?

Check Now

Fridge Freezer Sensor Replacement Kit

22.33
(inc. VAT)
22.33