Kenwood Tumble Dryer Relay PCB Module Stock Number: ES1561775
Genuine spare for select models of CDA, Kenwood and White Knight (Crosslee) tumble dryers
Manufactured by White Knight (Crosslee)
(This part fits select Kenwood models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Relay PCB Module
If the relay PCB (printed circuit board) module in your tumble dryer has suddenly tripped out then this could be the spare for you. Don't let a faulty control module put you off from using your dryer when you can grab this handy replacement and get your dryer working like new again.
Genuine spare for select models of CDA, Kenwood and White Knight (Crosslee) tumble dryers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
2 Questions and 2 Answers
the TB had been used in the hot weather on high setting, when i tried to use it the next day it would only buzz and try to start, i took the top off the TB and noticed the 2 brown (resistores) on the PCB board were very hot and the board was discoloured from the heat. with the top of TB off press the start button, and roll the drum it works fine with plenty of tourqe on the drum, i suspect the PCB board, i would be greatful for your comments.
-
eSpares Staff at eSpares says...
Check the motor capacitor as that may cause the buzzing but it does sound like the PCB could be damaged, we also have an advice centre article for you to help www.espares.co.uk/advice/symptom/tumble-dryer-not-turning
White Knight tumble dryer C42AW will not stay on. Turns for a few minutes then cuts out although the timer continues to count down - will stay on if I physically keep the button pressed down 1 Answer
-
Dean at eSpares says...
We believe the switch would need to be tested, please see our diagnostic video for more help www.youtube.com/watch?v=Ph1oCRrvXO4 just copy and paste into your browser.
Will this part fit my appliance?
Check Now
