Miele Tumble Dryer Thermostat - 175° Stock Number: ES1370614
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Thermostat - 175°
The thermostat in your tumble dryer controls the heating functions. It works by sensing what temperature is inside the dryer and regulates it accordingly. If your dryer isn't heating up to the full temperature, then it may be time to replace the thermostat.
Specification:
- Also Known As: Toc, Cut out
Genuine spare part for select models of Miele tumble dryers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
2 Questions and 2 Answers
my miele t294c tumble dryer will not heat up i think it is the thermostat can this be installed the wrong way round 1 Answer
-
Chris at eSpares says...
The thermostat can be connected either way around as it is a simple thermal switch.
I have a Miele T650C which cuts out (trips RCD in fuse box) after a minute or two of operation but works OK in COLD program. The thermostat currently reads as a short circuit. I have tested the heating element which reads 66 ohms and the other sensor reads 125K ohms.
- It should read as a short circuit as the device only changes when the temperature reaches or exceeds the design temperature. If the RCD trips disconnect the mains plug and thermostat and measure the device between one spade terminal and earth and then try the other terminal and earth.It should read as an open circuit on both occassions but if you do get a reading the chances are that it is leaking down to the casing when it reaches a certain temperature. Ensure you are not touching either of the probes metal when checking otherwise you risk measuring the resistance of your body.
Will this part fit my appliance?
Check Now
