Washing Machine Door Hinge Stock Number: ES100453
Genuine spare part for select models of Candy and Hoover washing machines
Manufactured by Hoover
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Door Hinge
If your washing machine door is hanging on by a thread it's probably just the right time to think about replacing the hinge. And if so, this genuine Hoover part from eSparescould be the perfect hinge for you to get your washing machine back to tip top condition once more.
Genuine spare part suitable for select models of Candy and Hoover washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
4 Questions and 7 Answers
Now I have received this item, how do I remove the original rivets without damaging the machine, and how do I fit the new rivets, as they seem to have some sort of nail attached to them, or does this come off? Any help would be greatly appreciated.
- The existing rivets should be drilled out with a drill slightly larger than the hole in the actual rivet - not the flat part of the rivet. The nail in the new rivet is pulled by the rivet gun to squash the rivet, which is aluminium, into place. The nail breaks off with the action of the gun.
- You need to drill out the old rivets from the machine - use a drill which is nominally the same size as the new rivets - it will tend to self-centre on the old rivets. To fit the new rivets you need a pop-rivet gun which uses the "nail-like" piece sticking out of the rivets to pull the rivet into a fixing condition - as it does this the "nail" breaks off
- drill out old ones and you need rivit gun to fit new ones . quite easy to do
As the original fitting has 2 rivets holding the hinge to the wash m/c, does the replacement hinge come with rivets or screws ? If it comes with rivets I assume you need a pop rivet gun to fit the replacement hinge after drilling out the old rivets ? can you confirm please.
- Yes, you do need a pop rivet gun
- Correct - two pop rivets supplied - you need a pop-rivet gun. No screws supplied - you use the original ones to fit the hinge to the door
-
Chris at eSpares says...
Drill out the tops off the old pop rivets and push the stubs through. Re rivet the new hinge into position.
WA110 WASHER/DRYER On my machine the dryer has stopped drying the clothes, Is this a common fault, and do you know what could possibly need repairing?
-
eSparesMalindi at eSpares says...
Unfortunately we cannot give out technical advice as to what the possible fault of your appliance is. Please consult the manufacturer of your appliance or an engineer for help.
Will this part fit my appliance?
Check Now
