Answer this Question (1 Answer)

• Disconnect unit from power source. Uncouple and plug waste water pipe. A wine cork inserted into the end will prevent leakage. If the unit is free standing turn it around so that you can access back panel. If it is an integrated unit you will have to remove it from it's recess. Remove back panel. Keep note of the type of screws and their positions. Tools required: Phillips screwdriver,vice grip, The heating unit is awkward to reach and you might find it helpful to also remove the side panels. When you see the unit it is held in place by 2 hoses and clips. Use your vice grip release clips. Fit new unit.Reverse procedure to secure replacement part. Re-assemble machine in reverse order. On start up Run machine on empty with a proprietary dishwasher cleaner cartridge. Refill rinse agent dispenser. You should be good to go. Good luck ! By JJ - Rolestown, Swords, Dublin - 18 January 2013