My Karcher Model K3.99M has suffered frost damage
I think the inlet elbow (ES538422?) has ruptured. I have had the part out but can see no damage but before removed and when replaced mains water sprays out from the joint at the filter end. Is this a common point of failure with frost or is it likely to be the 'O' ring that is damaged? Do I have the correct replacement part number? If so I will place an order.
Answer this Question (1 Answer)
-
Rory at eSpares says...
Hi Dayk155ed, the inlet elbow is the most common point of failure on your washer. It could well have been that the washer wasn't fully drained of water when you stopped using it before the winter, and during the cold weather has frozen and caused the elbow to crack. This part is a like for like replacement for your K3.99M. Hope this helps.
Karcher Pressure Washer Inlet Elbow Assembly - Version 1 Stock Number: ES538422
Genuine spare part for select Karcher pressure washers
Q&A tips & guidelines
-
Focus on the features or function of the product
-
Write your question in clear English
-
Be polite! Profanity won't be approved
-
Don't include personal info
-
Don't name other websites
-
Don't mention product prices