Skip to main content

Deliveries may take longer. COVID19

Deliveries may take longer than expected. We are working tirelessly to process orders. COVID19 More Information

LG Washing Machine OE Error Code

A washing machine is one of many helpful appliances in a household that you just can’t live without. With so many family members using the washing machine daily, as with any appliance sometimes faults can occur. If your LG washer is displaying an OE error code, it will usually be associated with water draining from the drum.

So follow our article below and engage your thinking cap. We’ll help get your washer performing like new and make sure that all your favourite garments can be worn again.

Cause 1

Blocked Filter

Most washing machines won’t start a spin cycle until they’ve fully drained the water from the wash.

If your machine is draining very slowly or not at all the most likely cause is a blockage somewhere in the drainage system and the most common is the filter.

Safety First! Please make sure that you have disconnected the appliance from the mains before beginning any repair.

The best way to check if your filter is blocked is to:

  • Drain the water from the machine by lowering the drain hose below the water level to a bowl or your machine may have a drain hose near the filter
  • Place a towel under the filter and pull the filter out to remove any debris that may have gathered. 
  • Check the pump impeller inside the housing turns freely and is not obstructed.

eSpares Top Tip: Check your filter as part of your regular maintenance to ensure your washer runs smoothly and ensure no drainage problems.

If the filter is damaged a replacement will need to be fitted, and you can see our extensive range of washing machine filters here within our extensive selection of washing machine spares.

For a more detailed guide on how to diagnose draining and motor problems in your washing machine, watch our helpful video that is sure to aid you in fixing your washer.

How To >

Cause 2

Drain Pump

A common draining issue could be caused by a faulty drain pump, which is used to drive and drain the water out of the washer.

If you cannot hear the pump trying to empty the water when you select a drain or spin cycle, then suspect the drain pump is the issue.

Safety First! Please make sure that you have disconnected the appliance from the mains before beginning any repair.

Here’s how to check if it’s faulty:

  • Locate the drain pump
  • Using a multimeter check the Pump, you will be looking for a reading of between 100 and 300 Ohms - with a reading of zero or excessively over then a pump has failed and will require replacing. (See here for instruction on how to use a multimeter)

If you require a new drain pump, browse our extensive range of washing machine spares for that perfect replacement.

We also offer a guide on how to replace a faulty drain pump; just see our video below for further details.

How To >