How to Replace the Guard on a Flymo Grass Trimmer

The guard on your Flymo grass trimmer is important for the trimmer's overall performance and safety. Because of this, you will want to replace it when it becomes loose or broken. Read on to learn how to carry out this replacement with our step by step guide.

Make sure your trimmer is unplugged from the mains and switched off before carrying out any work.

Let's get stuck in! To learn how to replace your Flymo grass trimmer's guard, simply follow the how-to video or the step by step guide below.

To make sure you purchase the correct guard for your Flymo grass trimmer, you're going to need to know the trimmer's model and product numbers. These numbers can be found on the rating plate which is usually located on the base, back or side of the trimmer.

Your trimmer's model number will be made up of both letters and numbers. Each trimmer will also have its own unique product number. The product number will consist of seven digits, followed by a dash and two more digits, and will start with the number 9 as shown in the picture below. If you need more help with locating your Flymo's trimmer model and product numbers, you can head to the finding model numbers page on our website.

Once you have located these numbers on your trimmer, you can find the correct part on our online shop.

Once you have your replacement guard, begin the process of removing the old one by removing the spool cover. To do this, push in the two clips on either side and lift the cover away.

Beneath the cover, you will see the trimmer's spool and line. To remove these, simply lift out the spool and carefully pull the lines out as well.

To remove the guard, you will need a flat head screwdriver. Using the screwdriver, push down into the two clips on either side of the guard to release it. Then turn the guard clockwise to remove it.

To fit the new guard, line it up with the two arrows on the trimmer. Slot the guard over these, then turn it anti-clockwise to click it into place.

Next, slot the spool back into place and feed the lines back through on either side. You can then turn the spool itself to get the line to the correct length on both sides, which is around the length of the line stop.

Finally, refit the spool cover by holding in the clips on either side and pushing it back into place.

And that's all there is to successfully replacing the guard on a Flymo grass trimmer. We hope this guide has helped you keep your trimmer working and in tip-top shape!

While replacing old parts on your grass trimmer can keep it in great shape, repairs and replacements aren't the only form of care required. Make sure you regularly clean your grass trimmer to keep its performance level as high as possible - especially during times of heavy and prolonged use during spring and summer.

If you're experiencing any other issues with your Flymo grass strimmer, you can head over to our Trimmers & Garden Vacuums Repair Help & Advice section for more articles on maintaining, repairing and caring for your appliance. You can also find any grass trimmer spare parts and accessories you might need here on our website.

Before you go, don't forget to sign up to our mailing list below to receive exclusive offers and discounts on household appliance spare parts and accessories, as well as tips and advice on fixing and maintaining.