Get The App From Play Store!

Skip to main content

Get 10% off EVERYTHING for the spring bank holiday when you spend €30 or more. Promo ends 27th May. Use code: BH10

Get 10% off EVERYTHING for the spring bank holiday when you spend €30 or more. Promo ends 27th May. Use code: BH10

Fridge Freezer Thermal Fuse - Type 3AWG Stock Number: ES644151

Spare for select Samsung fridges & freezers

Product Q&A

Ask a Question

I can hear the motor running. There is no build-up of Ice . The ice in the dispenser had melted away now but the motor and switches function ok. I have the freezer set to -21 but it is at 12 currently and rising. Its quite an old unit but I like it so I would like to repair What is the most likely fault? Thanks

By James Smith - birmingham - 04 October 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    It sounds like a problem with the refrigeration system, this can be difficult to diagnose without the correct equipment to determine if the compressor is pumping to get cold.

Answer this question
By George Whenham - Southam - 05 June 2018
  • Dean from eSpares
    Dean at eSpares says...

    Please see our advice centre for more help www.espares.co.uk/advice/symptom/fridge-freezer-alarm-keeps-going-off just copy and paste into your browser.

Answer this question

The fan is making a very loud noise which stops when door is opened,large amount of ice around fan housing. What is the modification to cure this problem Thanks

By Paul - Southport - 27 January 2018
  • Chris from eSpares
    Chris at eSpares says...

    Some Samsung fridge freezers can suffer from ice build-up and may have a modification kit to prevent this occurring Stock Number: ES1406833. Fully defrost before removing the cover. Fit the brackets onto the back of the upper mounting screws, replace and move the sensor to the far left of the pipework and reset codes as per the instructions. Check and replace the defrost heater if required.

Answer this question
By Michael - Northern Ireland - 24 April 2015
  • Chris from eSpares
    Chris at eSpares says...

    The evaporator sensor on the fridge section has been changed to a white one and is supplied in a modification kit ES1406833

Answer this question
By Big al - - 27 November 2013
  • Chris from eSpares
    Chris at eSpares says...

    It sounds like a defrost problem, There is a heater on the evaporator that should melt and clear the ice every sixteen hours or so. Carefully remove the cover (if it is not frozen on) and check the heater and this fuse and any thermal cut outs if fitted (cannot be specific as no model number given). If it is an RSH american fridge-freezer there is a modification to prevent an ice ball occurring.

Answer this question

My Fridge Freezer Mod Nr is Samsung RS21DNSW

By Josie - Malta - 28 August 2013
  • Chris from eSpares
    Chris at eSpares says...

    There is a small 'test' button on the ice maker. Press the button for a few seconds and the tray should 'cycle' dispensing ice and refilling. if it doesn't do this it suggests a faulty ice maker.

Answer this question
By xjanex - - 27 June 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Xjanex, this part is a sensor which monitors the fridge's temperature. If it's not functioning correctly, the fridge may be too cold or too hot, and you may getting innaccurate readings on the temperature display.

Answer this question

Will this part fit my appliance?

Check Now