Get The App From Play Store!

Skip to main content

Get 10% off EVERYTHING for the spring bank holiday when you spend €30 or more. Promo ends 27th May. Use code: BH10

Get 10% off EVERYTHING for the spring bank holiday when you spend €30 or more. Promo ends 27th May. Use code: BH10

Washer Machine Heater Element - 1260W Stock Number: ES956494

Genuine spare part for select models of Ariston and Hotpoint washing machine

Read more

Manufactured by Ariston

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Washing Machine Heater Element - 1260W

If your washing machine is not heating up the water to its usual heat, there could be a problem with the element. A faulty heater will affect the cleanliness of your laundry after the cycle has ended due to low water heat. eSpares could soon help get your washer back to the appropriate temperature to ensure no dirt or stains are left on your clothes. 

Specification:

  • Wattage: 1260W
  • Voltage: 230V
  • Single Tag Type
  • Full Length of element: 65mm
  • Length of element to bracket: 35mm
  • Width of element: 165mm
  • Length of element to tubliar bend: 80mm

Genuine spare part for select models of Ariston and Hotpoint washing machines.

Please check the list of models this part will fit to ensure it is compatible with your appliance.

Ask a Question

2 Questions and 2 Answers

By carver - weston-super-mare - 15 November 2013
  • Christopher from eSpares
    Christopher at eSpares says...

    The problem is likely to be the dryer element, there are two types fitted Stock Number: ES215164 and Stock Number: ES956494. Dismantle and check which type is fitted and if there is any signs of burn or damage to the element.

Answer this question

Hotpoint WD640G

By Dave - Merseyside - 17 March 2011
  • Rory from eSpares
    Rory at eSpares says...

    Hi Dave, first thing to would be to double check that your new element is connected properly - it might be worth removing it and fitting it again.  Also, check all the electrical connections to make sure they are definitely fitted correctly. Failing that, it could be a sensor or the PCB - if this is the case you'll probably see an error code or flashing lights on the control panel. The last thing it could be is burned wires; check all wires for signs of burn damage. Good luck!

Answer this question

Will this part fit my appliance?

Check Now

Washer Machine Heater Element - 1260W

95.82
(inc. VAT)
95.82