Skip to main content

Call 1800 936 660

How to Replace A Tumble Dryer Control Board (Hoover)

The control board (otherwise known as “PCB” or “Module”) is the electronic unit that controls the programs in your appliance. If there is a fault with the PCB, there is nothing that can be done except for having it replaced.

If your tumble dryer is suffering from a faulty PCB, you will be pleased to know that at least you have landed at the right place to help you out!

This video shows an example on how to remove or replace the part on a typical machine, some models may be different but the procedure should be similar

  What You Will Need:

  Step 1 - Switch off Your Appliance

Safety First! Please ensure that you have disconnected the appliance from the mains before starting any repair.

  Step 2 - Remove the Top of The Appliance

To remove the top of the appliance you just need to undo the screws that are holding it in place.

  Step 3 - Remove the Control Panel

The next step is to take off the control panel, which again is simply held in place with some screws. With the screws removed the control panel can drop down, and you will then have the elusive PCB in your sights.

  Step 4 - Remove the Old Control Board

The best thing to do is to start by removing the electrical connectors from the old board (on this model there is no need to take a photo - as they only fit in one position back on the new board) You may need to release a catch on one of the connectors in order for it to be released.

  Step 5 - Fit the New Control Board

With all the electrical connections removed, you can now pop the board out of the control panel just by releasing the clips that are holding into place.

Grab your new control board, and ensure that the control shaft is able to fit right through the circuit board (so you have to make sure the shaft is in the right position, which is normally at the 12 o'clock position)

The board just fits in on one side before clicking onto the other side, you can then refit the electrical connections, you're then ready to refit the control panel.

Well you will be pleased to know that your repair task is now completed! It really is as simple as that Hopefully now your newly gained tumble dryer DIY skills have meant that you now have a fully functioning tumble dryer again.

Your Tumble Dryer In Need Of Some Loving, Care & Attention?

If you really want to get the best performance from your tumble dryer, and better results for your clothes, then look no further than these energy saving tumble dryer balls - providing a natural, eco-friendly alternative to fabric softeners (ideal for delicate or sensitive skin). When placed in your tumble dryer their square tips compress and soften fabrics, reducing drying time by up to 25%.

Need A Control Board For Your Tumble Dryer?

Fixing your tumble dryer PCB yourself can save you a lot of money compared to booking a repair or buying a new tumble dryer. Here at eSpares, we have a wide-range of replacement tumble dryer PCB’s for you to select from - so you can soon be on your way to repairing it yourself.

Now you can add tumble dryer control board (PCB) replacement to your DIY repertoire. Congratulations! If you need any other help for your appliances you can find more videos from Mat and the team at eSpares, who are always on hand with appliance repair advice in your time of need.


Print Article Print this article