Hotpoint Tumble Dryer Drum Shaft for TDC32N Stock Number: ES664022
Genuine spare part for select Ariston, Creda, Crusader, Hotpoint, Indesit, Jackson and Proline dryers
Manufactured by Hotpoint
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Drum Shaft
If your tumble dryer's drum shaft has worn out, there are two tell-tale signs: the drum will be making clanging noises when the machine is running, and the drum will be moving around inside the cavity of your dryer. Replace a worn out drum shaft pin with this spare from Hotpoint to restore your dryer to working order.
Genuine spare part for select Ariston, Creda, Crusader, Hotpoint, Indesit, Jackson and Proline tumble dryers. Prior to ordering, please check the list of appliances to ensure this is the right part for you.
11 Questions and 13 Answers
- The screws you remove are self tapping, so no tap is required.
-
Rory at eSpares says...
Hi there, the screws you need are Torx head, T25 - so the tap would correspond to this.
the holes on the plate are obvious to secure one end of the drum shaft, but does the pointy end of the shaft have a hole across the shaft to allow the fitment of a split pin? This is for a replacement of a Creda Excel T632CW Condenser Dryer drum shaft.
- A split pin can be used, but there is a special "S" shaped pin that goes in this cross drill hole. Always use a washer between bearing and split pin/"S" pin.
- yes this shaft is drilled to accept a pin, use the pin that is in the old shaft, not a split pin, the pin is just a single, easy to fit.
-
Chris at eSpares says...
It may be possible but the easiest way is shown in the video attached.
After seeing the video I think I might need the large riveted model but both come up with the fact they are incompatible ?
-
Chris at eSpares says...
This is suitable if your drum has three screws in the middle. if it has no screws you need Stock Number: ES1672507
I have a 3 year old hotpoint Aquarius TCM580 condensed tumbler, do I need a riveted drum shift kit or a normal one - thanks 1 Answer
-
Chris at eSpares says...
This depends on production. If you have 3 screws in the centre of the drum you need Stock Number: ES1562106 if welded use Stock Number: ES1672507.
Will this part fit my appliance?
Check Now
