Fan Oven Element - 1800W for ML6CDW Stock Number: ES555487
Spare part for select Beko, Belling, Leisure, Blomberg and many other brands of cookers
Will this part fit my Appliance?
Check this part fits your appliance
Fan Oven Element - 1800W
If your cooker is not heating up the most common cause is a faulty or blown oven element. Fix it yourself by replacing your damaged element with this spare from eSpares. It's a customer favourite and saves you from the cost of a new cooker. You'll soon be back with a fully functioning oven.
Specifications:
- Type: 2 Turn
- 1800 Watts
- Length: 225 mm
- Width: 193 mm
- Bracket: 70 mm
- Tags: 18 mm
Spare part for select Beko, Belling, Leisure, Blomberg and many other brands of cookers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
10 Questions and 10 Answers
Does this element fit from the rear of the oven with machine screws onto the element fixing plate 1 Answer
-
eSpares Staff at eSpares says...
The element is normally secured from the inside, remove the back panel and you will see the element fixing screws.
I have removed the front cover from inside the rear of the oven only to find that the element is secured by two screws at the REAR of the actual cooker! I don't know if this is the correct element or the higher rating element is or do they both screw in from the rear of the actual cooker and not from inside the oven?? Can you advise as I need to order part as soon as possible. Thanks
-
eSpares Staff at eSpares says...
This element screws from the inside but make sure you check the element is correct for your model before ordering.
Thanks for the video, but I stupidly put the terminals back on incorrectly and plugged the live to earth and v.v. When I switched on there was a pop and now nothing works. element still show OK on a ohm meter, but there's no power to any of the three ovens. Any idea please? Is there a fuse or cutout I need to check/change?
-
eSpares Staff at eSpares says...
If the cooker is hard wired it will have taken out the fuse in the fuse board or if it has trips it would have tripped that circuit, check that before suspecting anything else.
i've ordered my replacement element but your video shows it held in place by 3 screws? mine seems to have screw threads but no screw heads? as if it was fitted from the back? how do i get it off please?? 1 Answer
Lamona Fan Oven Element - 1800W for HJA5110 , left oven
-
Dean at eSpares says...
You would need to take the oven out to gain access at the back of the oven, the screws are removed from the back
Will this part fit my appliance?
Check Now
