Skip to main content

Washing Machine Heating Element - 1700W Stock Number: ES546604

5.0 out of 5 5.0 out of 5 (68 Reviews)

Washing Machine Heating Element - 1700W - ES546604
View video

5.0 out of 5 5.0 out of 5 (68 Reviews)

Genuine spare part suitable for select models of Indesit, Ariston and Hotpoint washing machines

Read more

Manufactured by Indesit

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Washing Machine Heating Element - 1700W

If the washing machine is not heating up the water to its usual heat, or it is heating erratically, it could be a problem with the element.

A faulty element will impact on how clean your clothes are washed during the cycle, as they will not be as clean without the water being maintained at the correct heat. eSpares could soon help get your washing machine back to the appropriate heated temperature, with this replacement spare element.

With the help of eSpares, you could soon be able to get your washing machine in full working order, so you can tackle the laundry that has piled up!

Specification:

  • Wattage: 1700W
  • Length: 170mm

Genuine spare part suitable for select models of Indesit, Ariston and Hotpoint washing machines.

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Write a review

Here’s what other people are saying about Washing Machine Heating Element - 1700W.

(68 reviews)

5.0 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 5 out of 5
  • Berkshire
    5.0 out of 5

    Washing Machine Element

    Quick and efficient help and service from espares and it was a straight forward job as per the video. I do however agree with the other review comments that it is a real struggle to get the old element out as the seal expands on the inside of the drum and over time it forms a work hardened lip which stops the old seal from simply sliding out. Removing the sensor first helps as you can then put a small lever through the seal hole to prise the seal out. Once removed, refitting is a simple 5 minute job and the machine is up and hot washing again.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • 5.0 out of 5

    Elements

    Quality service from spares fitted it myself due to thier very handy video. So saved a few quid too my washing machine is like Triggers broom.

    Ease of fitting 3.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • surrey
    5.0 out of 5

    always great service

    great service and prices always find espasres easy to use and great spares list ..

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

5 Questions and 5 Answers

By Martin Kilduff - Runcorn - 14 October 2018
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    The heater does not come with the sensor, if required it would need to be ordered separately and it just pulls out.

Answer this question

I have a Hotpoint washing machine, model: WMFG942. It is tripping the fuse box (RCD) as soon I switch it on from mains. I would like to know if this is the right spare part to solve the problem, for the above washing machine model... Thanks

By Juve Halinda - Birmmingham - 14 June 2018
  • Dean from eSpares
    Dean at eSpares says...

    You will need to test the heater to confirm if it has failed, this video will help www.youtube.com/watch?v=Ftm8lDVVw2E just copy and paste into your browser.

Answer this question

Good evening, I have today received a heater element for my Hotpoint Hf8B593GUK washing machine, I have carefully followed your video on how to fit. I have released the old one quite easily it is quite free of the drum. but i cannot withdraw it from the drum it feels that something is catching. Please can you advise Regards Peter Warwick

By Peter Warwick - United Kingdom - 10 March 2015
  • Chris from eSpares
    Chris at eSpares says...

    Elements can be difficult to remove due to limescale build up. Ensure the seal and clamp are free from the tub and carefully work back and forth and side to side to dislodge any build up. You may have to prise out with a screwdriver but be careful as some machines have a locating clip in the tub that could be damaged.

Answer this question

My machine leaked yesterday, and after hours of hunting where from we found it. The water was coming from around the seals of what I know now is the heating element. My question is does this sound right, I have only just been able to take it out as I had to drain the water that was still in the drum which came out under the seal?

By roadrunner32 - - 16 April 2010
  • there is a nut at the back of heating element, before you put element on place loose the nut, when element is placed you have to tight the nut, then rubber seal is squeezed and seals the heating element properly By gecon - london / richmond - 17 June 2010
Answer this question

fitting 1 Answer

how does the element stay in place? i have taken old one out but it looks as if it is simply a push fit? surely there must be some way in which to ensure it seals into place?

By alba - scotland - 05 November 2008
  • Rory from eSpares
    Rory at eSpares says...

    Hi Alba This element simply slots in to place with a click in the thermal lock. Your washing machine will be in its element!

Answer this question

Will this part fit my appliance?

Check Now

Washing Machine Heating Element - 1700W

35.09
35.09