Dyson Vacuum Brushroll Assembly Stock Number: ES545159
Will this part fit my Appliance?
Dyson Vacuum Brushroll Assembly
Make sure no dirt or stray hair residues are left on your carpet with this tough brushroll assembly. It has ABS construction with nylon bristles to ensure thorough cleaning. With an agitating brush, it will collect any hair and dust in no time at all.
This genuine spare part fits select Dyson vacuum cleaners.
Prior to ordering, please check the list of appliances to ensure this is the right part for your model.
3 Questions and 3 Answers
does this have bearings inside 1 Answer
Chris at eSpares says...
This appears to have the axle and bearings as well as the bearing caps.
- I have just fitted a new Dyson roller brush and the bristles are 6 mm (the one I took off was down to 4 mm). The cleaner now works like new. Hope this helps.
- You only receive the bar but no instructions.Turn your Dydon over and unscrew the 3 screws (only 1/4 turn) and take plastic bottom off.Then you have a problem with the hoover belt which is rubber,very tight and on one end of the brush.I used a screwdriver to hold the belt and and with a bit of a struggle, got out the old bar and managed to fit in the new one and the belt must go on the roller on the right hand side.