Get The App From Play Store!

Skip to main content

Pressure Washer Inlet Elbow Assembly - Version 1 Stock Number: ES538422

Genuine spare part for select Karcher pressure washers

Read more

Manufactured by Karcher

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Pressure Washer Inlet Elbow Assembly - Version 1

If you've been noticing a lack in the suction pressure of your pressure washer, it's most likely a faulty inlet. If this has split, or the seal is slightly worn it can drastically affect the power intake. This replacement L shape plastic inlet elbow assembly is a genuine Karcher spare part.

Specification:

  • Dimensions: 30 x 70 x 100 mm (H x W x D)

Please Note: Check the image below, if the part you need is positioned underneath the control head, then this is the correct part. If it is positioned to the left or above the control head, then this is not correct part you require.

Elbow Joint

Genuine spare part suitable for select models of Karcher pressure washers.

Please check the suitable model fit list, and the information stated above, to ensure that this is the correct part for your appliance.

Important - Please Note:

  • This is version 1 and fits into the pump and held in with the metal cover

If you need help finding your model number please view our Karcher video tutorials section.

Please note: This spare is chassis number and serial number dependent. Please contact our call centre with this information so we can check the spare is correct. Your chassis number will look similar to 1.504-604.0.

Karcher spares reference: 9.001-187.0

Ask a Question

19 Questions and 20 Answers

your video on how to fit shows the engineer removing a clip. This clip is not on my washer a K3.99M, how do I fit the assembly

By bert - aberdeenshire - 25 March 2011
  • I cannot find the release clip for the Inlet Elbow on my K4.99, do I need to try something else? By Barrie - Norwich - 02 May 2011
  • Rory from eSpares
    Rory at eSpares says...

    Hi bert, the inlet fits in the same was as the video above, but rather than a clamp holding it in to place, the cover acts as the clamp.

Answer this question

for a karcher K3.99M (1.423-245.0)

By Asad - Birmingham - 20 June 2018
  • Dean from eSpares
    Dean at eSpares says...

    You will need to split the casing, here is a video to help www.youtube.com/watch?v=qsa9DrI5szI&t just copy and paste into your browser.

Answer this question
By james key - workington cumbria - 17 November 2017
  • Chris from eSpares
    Chris at eSpares says...

    There should be information on the ratings label. This part is suitable for a K3.90 model

Answer this question
By michael - bristol - 23 January 2017
  • Parminder from eSpares
    Parminder at eSpares says...

    We believe a torx kit will be required. Please see the link below for our "9 Piece Torx Head Screwdriver Set", www.espares.co.uk/product/es1251179

Answer this question

Looks like the part that broke on mine. Serial no. is 291975.

By Roland Paquette - Sudbury Ontario Canada - 11 November 2015
  • Chris from eSpares
    Chris at eSpares says...

    To source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Pressure Washer Inlet Elbow Assembly - Version 1

18.66
(inc. VAT)
18.66