Zanker Washing Machine Door Interlock DL-S1 124967514 402 for 788252_00 Stock Number: ES488164
Genuine spare part for select AEG, De Dietrich, John Lewis Kuppersbusch and Zanussi washing machines
Manufactured by Electrolux
(This part fits select Zanker models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Door Interlock
The door interlock is an electronic device that is designed to give a time delay of approximately 2 minutes before the door of a washing machine can be opened once the wash/drying cycle has completed. Door locks should be checked regularly to ensure that they are working correctly. During the cycle the door should remain locked; as it is can be extremely dangerous if this is not the case.
The common fault when a door interlock fails is that the washing machine will not start. There will be power to the washing machine, which is usually shown if the light is present and lit up on the front fascia panel. However, when the door is closed and the wash/drying cycle is selected and started the machine will appear 'dead'.
Specification:
- 4 Tag
- Type: Bitron DL-51
Genuine spare part for select AEG, De Dietrich, John Lewis Kuppersbusch and Zanussi washing machines.
Please note: This part is PNC number dependent. An example PNC number is 91460200000. Please contact our Call Centre with your washing machine's PNC number to make sure you get the correct part for your appliance.
Please check the model fit list to ensure compatibility with your appliance.
7 Questions and 6 Answers
When I close the door and set the programme, the door lock light flashes and clicks repeatedly. The door lock light will not stay solid even though the door is firmly closed so the machine will not start filling. Would this be a door interlock problem or the PCB Board, please?
-
Dean at eSpares says...
We believe it is likely to be the door lock, so check that first before suspecting anything else.
I Bought the door handle kit DST405508551 fitted... door still didn't close so thought it must be the door lock interlock system bought this and fitted. Still didn't close. Took everything off put back to old stuff. Holding lock in the machine until the door interlock clicks and the door stays shut and the machine runs no error codes. Any idea what is wrong????
-
Dean at eSpares says...
Check the door has not dropped otherwise the door catch won't connect into the door lock correctly causing it not to lock.
zanussi zwh6105 fault code E40 door lock would this also cause the machine not to spin or empty the water
-
Dean at eSpares says...
If the door lock is not activating the washing machine will not start so it will do nothing.
The AEG Lavamat 72640 is showing an E40 error, I have checked the manual for the E40 error and done the following (replaced main fuse, check door is closed firmly, checked drain tap at the front bottom right). But the washing machine is still showing an E40 error and won't allow for the wash to start, it turns on but won't start on any wash cycle.
-
Chris at eSpares says...
E40 is a door lock error and may need replacing, for more information see our video: http://www.espares.co.uk/advice/7/2498
The interlock clicks like it always has when I start the machine, then beeps and says E40. Is there a way to tell if the interlock is the problem and needs replacing? Its a John Lewis JLWM1407
-
Chris at eSpares says...
It is likely a new lock will resolve the problem.
Will this part fit my appliance?
Check Now
