Indesit Tumble Dryer Thermostat Kit for G75C Stock Number: ES487865
Genuine spare part for select Ariston, Creda, Crusader, Electra, Hotpoint, Indesit, Jackson and Proline tumble dryers
Manufactured by Original Quality Component
(This part fits select Indesit models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Thermostat Kit
If your dryer is blowing cold air then this thermostat kit could save you hundreds of pounds on a new tumble dryer. We get consistent customer feedback on how easy this tumble dryer thermostat kit is to fit so you can feel confident that this is a repair that you can do yourself.
When you order this kit you'll get 2 tumble dryer thermostats.
This kit is a spare part for select Ariston, Creda, Crusader, Electra, Hotpoint, Indesit, Jackson and Proline tumble dryers.
To prevent failure of your tumble dryer thermostats please use the following guidelines:
- The disc of the stat must not be touched.
- Do not terminate the dryer cycle early. Your dryer needs the last 10 minutes of the cool down cycle to occur in order to clear residue heat in the dryer airflow.
- Blocked airflow will cause the thermostats to fail. Make sure you're not overloading your dryer and regular clean your lint filters after every load and empty the condenser (if you have one) as recommended by the manufacturer.
- If your front duct thermostat isn't working it will cause unnecessary stress on this part causing failure.
32 Questions and 34 Answers
i have Hotpoint TC71N needs new thermostats ...but no idea how to find date code ... description says IMPORTANT 64 or 65
- After phoning you I discovered that the date code is the first 2 characters of the serial number, in my case 78101179. This makes mine 78 which is later than 64/65 so the parts should be OK. The serial number is inside the drum on the left.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
The drier stops after running for a few minutes and you have to wait before it will start again. What parts do I need
- sounds like the starter relay needs to be replaced this might work but ask a spares part man frist cause they will cost you about £35 so ask 1st
-
Rory at eSpares says...
Hi Duggles, it sounds as if you need to give the condenser box a clean. Check out the last question on this page for help: http://www.letsfixit.co.uk/html/tumble_dryer_faq.html
-
eSpares Staff at eSpares says...
The photos show that the 130 degrees stat is the one with a green spot on it.
I fitted new thermostats and heating element and my Creda tumble drier still isn’t heating up 1 Answer
-
eSpares Staff at eSpares says...
For more help see our advice centre articles www.espares.co.uk/advice/symptom/tumble-dryer-not-heating-up just copy and paste into your browser.
replacement thermostats have green and yellow dots on them - originals are blue and white how do they match up colour wise? 1 Answer
-
Dean at eSpares says...
The thermostat with the green spot has a raised part between the two connectors that will be the same as the original.
Will this part fit my appliance?
Check Now
