Miele Oven Door 3-Sided Seal Kit - 1.5m for CS1212 Stock Number: ES486644
High quality spare part suitable for select models of ovens
Manufactured by Electruepart
(This part fits select Miele models)
Will this part fit my Appliance?
This product is compatible with:
- Cookers & Hobs - That Match The Criteria In The Description (See The Video Too)
High Quality Replacement Oven Door 3-Sided Seal Kit - 1.5m
This universal door seal is designed to fit most modern ovens that have a three-sided seal. The seal attaches to the body of the oven by a single hook in each corner.
Please make sure that there is a single hole in each corner of your oven. This will not fit ovens that have two holes in each corner.
The kit includes a 1.5m length of black door seal that you cut to the right size for your oven, plus 2 corner and 2 straight hooks to attach the seal to the body. Comes with full fitting instructions.
PLEASE NOTE: Not suitable for ovens with curved corners or more than one hole in each corner.
To fit the new seal:
- Measure the distance between the holes
- Cut the top and sides of the seal to size
- Trim the joints to 45°, leave the bottom end of the side seal at 90°
- Insert the barbed corner hooks into the slot of the seal at the top corners
- Insert the barbed straight hook into the slot of the seal at the bottom of the sides
- Clip the corner hooks into the top holes and the straight hooks into the bottom holes on the face of the oven
Specification:
- Colour: Black
- Silicon
- Length: 1.5m
- Depth: 10mm
- Includes 2 corner brackets and end clips
Where possible we would recommend that you order a branded/genuine door seal for your cooker. To find out if we carry the door seal for your oven please enter your oven model number in the search box above.
10 Questions and 11 Answers
my control knobs on my belling 335wh oven keep on melting and going soft! should I replace then oven door seal ? 2 Answers
- Sounds like your oven cooling fan is not working
-
Rory at eSpares says...
Hi andy1976, it sounds as if heat is escaping from the top oven, causing the control knobs to melt. A damaged door seal is the most common reason for this happening. Check out the video on this page for help fitting the door seal.
model no 444449579 serial no 00930805 door seal
-
Ashleigh at eSpares says...
Universal parts are suitable for most appliances and do not have a specific 'fit list'. If your appliance matches the specifications in the description, this item will be suitable.
-
Chris at eSpares says...
'Goal post' refers to a 'top bar' with vertical 'posts' so creating a square shape with the lower edge missing.
The existing lower oven is around 33 years old and is goalpost design with rounded corners attached with clips?
-
Chris at eSpares says...
The clips supplied with this kit will give 'square' corners but it should be possible to use this kit.
Do I need to use a heat resistant sealant also as the seal will actually be fitted on the door not the oven surround. 1 Answer
there would be quite a gap between the hooks and the original seal was stuck down as well as hooked. My cooker is a Leisure Bistro 55 ng 5767.
-
Chris at eSpares says...
The seal should not be stuck down just held taught by trimming a little shorter than the actual length and stretching into position.
