Dyson Vacuum Cleaner Clutch Assembly for DC33 MULTI FLOOR Stock Number: ES212526
Genuine spare part suitable for select models of Dyson vacuum cleaners
Manufactured by Dyson
Will this part fit my Appliance?
Check this part fits your appliance
Vacuum Cleaner Clutch Assembly
If you are struggling for a fantastic vacuum cleaner performance, eSpares have just what you need with the replacement. This replacement clutch assembly will help your vacuum tackle the dirt and dust out of your carpets. With the help of eSpares and this replacement, you will soon be able to tackle cleaning tasks in your home with ease!
Genuine spare part suitable for select models of Dyson vacuum cleaners.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
14 Questions and 19 Answers
does the outer green knob come with clutch unit, if not how do you the knob off without breaking it. unable to remove clutch unit through casing 3 Answers
- Yes it does come off, just tilt to the side & use a screwdriver to hold the clip off then tilt the other side, its difficult, be patient.
- it is held on by two "y" clips on the knob be careful when you ease them off.
- The outer knob is not present with the assy. You need to remove the one on the cleaner, this is a snap fit at two points. Slide a thin screwdriver in and lift the snap fit lugs to remove
Does the clutch assembly come with both belts as shown. When re attaching belt onto brush roller do i need a special tool to stretch the belt over.
- yes it is supplied with both belts , i fitted the belt over the roller then reinserted the far end of the roller bar into the caseing then using a certain amount of force located the end nearest the belt.
- yes both are fitted
- The clutch assembly has both belts fitted. The brush belt can be fitted without the special tool but it is difficult. You can hook the belt with a screwdriver shaft and pull it up but you have to have very strong fingers and a high pain threshold. Be very carefull or you might break something. If you can get hold of the belt tool then use it. If i was to do it again i would make up a tool or buy one as there is a risk of damaging the roll, the casing or my fingers. Take care.
- Don't, it's fiddly and in the end your better off buying the clutch than just the belts. I bought the belts for my clutch, what a pain to take apart and put back together.
-
Chris at eSpares says...
See our video: How to replace a Dyson clutch for how to remove the clutch.
Vacuumed is 10 years old. Not picking up on carpets. Good suction on hand held. How do I know if it needs a new clutch ?
-
eSpares Staff at eSpares says...
You would need to access the clutch to check if it's physically working, also check the belt in case it has broken.
Will this part fit my appliance?
Check Now
