Fridge Ranco K59-P3153 Thermostat for ARG697/G/WP (853469701010) Stock Number: ES208951
High quality spare part for select models of Whirlpool fridge freezers
Will this part fit my Appliance?
This product is compatible with:
- Whirlpool Fridges & Freezers - (That match the specifications listed)
High Quality Replacement Fridge Thermostat
If you have noticed that the temperature in your fridge or freezer is not at the correct levels, it could be time for a new thermostat. The function of the thermostat is to regulate the temperature to the correct levels, to help ensure your food is being stored at the correct temperature. With the help of eSpares and our replacement spare thermostat, we could soon get you back to a fully working appliance again in no time!
Specifications:
- Type: Ranco K59-P3153
Please note: This is only for use in 2 door refrigerators fitted with an auxiliary stop switch. If you're unsure if this will fit, please contact us with your model number.
12 Questions and 13 Answers
whirlpool fridge model afb635
-
Chris at eSpares says...
Ref John Adams 'answer'. For information to diagnose your problem see our video: How to diagnose a fault with a frost free fridge freezer http://www.espares.co.uk/advice/2/2113
- motor runs but fridge is not really cold
-
Chris at eSpares says...
If the motor does not stop when turned to minimum and the ice is even across the evaporator replace this part.
whirlpool 471/A/3 integrated fridge freezer. freezer works but fridge not cooling. is this the stat faulty ? 1 Answer
-
Dean at eSpares says...
If the freezer is working then it is unlikely to be the thermostat but meter the thermostat to confirm, if the thermostat is ok then it may be the refrigerant system.
I installed the part in my fridge but now I have gotten from +10 till -5 in the fridge. Tried both max and min on the thermostat but it is till the same. Anyone have any good answer to this?
-
Chris at eSpares says...
Check you have connected the wires correctly as there is one switch to the light and another to the compressor.
During the recent cold spell, my freezer wasn't completely freezing the items in it, and they started to soften, and there was hardly any frost on the coils. I moved the internal light switch in the fridge compartment so that the light remained on, i.e. there was warmth under the thermostat, and the compressor then switched on and off normally, and the freezer froze the items as it should, and frost built up on the coils. Is this an indication that the thermostat is defective ? If so, will this thermostat fit a Whirlpool ARC5553 / 850155515101 ?
-
Chris at eSpares says...
In your instruction book it will tell you that as this appliance only monitors fridge temperature that if in a cold environment the freezer may defrost as the fridge does not need to come on as often. It will also tell you that by turning on the internal light it will introduce a little warmth inside and turn the compressor on more often helping keep the freezer frozen. This fridge freezer like many should be in a warm kitchen not a cold utility or unheated area and is not faulty.
Fridge section,of Whirpool fridge/freezer, the top half of the back wall of has a rapid build up of ice. 1 Answer
Whirpool model ART476/R. Thermostat is set at 1 [minimum] but ice rapidly builds up on the back wall of the fridge.
-
Chris at eSpares says...
This suggests either a loss of refrigerant or an insulation problem. This would require a systems engineer to re gas it.
