Hotpoint Tumble Dryer Poly-Vee Drive Belt - 1578H5 for 9306W Stock Number: ES131871
Spare part for select models of Creda, Hotpoint and Export tumble dryers
Manufactured by Original Quality Component
(This part fits select Hotpoint models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Poly-Vee Drive Belt - 1578H5
If the drum does not spin at the desired speed it may lead to your clothes being left damp at the end of each cycle. This may be caused by a worn out drive belt. eSpares could soon solve this problem for you and get your tumble dryer spinning correctly again, so you can enjoy dry clothes once more!
Specification:
- Type: Poly-Vee
- Length: 1578mm
- Type of ribs: H
- Number of ribs: 5
Spare part for select models of Creda, Hotpoint and Export tumble dryers
Please check the list of suitable models to ensure that this spare part will fit your appliance.
Please note: This part is date code dependent. The date code is the first 2 digits of the serial number. Please check that your model and date code are listed under the list of compatible appliances to ensure that this is the correct part for your tumble dryer.
11 Questions and 11 Answers
Having removed the front panel of my Hotpoint 9306W drier to replace drum belt now having great difficulty in replacing the switch control unit would appreciate advice 1 Answer
-
Chris at eSpares says...
To locate the 'cabinet bars' use a long thin bladed screwdriver or knitting needle through one front panel hole to push the bar to the correct position and fix with a screw. I have always found this machine to be a particularly difficult to work on.
You mention in a reply to Tracey that the front facia and control knob have to be removed on the Creda37377 before removing the top,sides and front as one piece. How is the facia and control knob released for removal ?
-
Chris at eSpares says...
We do not have detailed information on this but from memory the knob will simply pull off and behind it is one screw. Once the screw is removed the control panel will slide to one side and lift off giving access to the other screws.
Hi having watched video of someone changing the belt, our dryer has no remove able sides. How do we get into it? It seems to have a number of rivets rather than screws?
-
Christopher at eSpares says...
This table top dryer has to have the control knob and the facia removed before removing the top sides and front panel as one piece.
I have received the belt ES131871 but it appears impossible to open up my Hotpoint 9306W to install it 1 Answer
-
Caitlin at eSpares says...
See if perhaps the video below (albeit a Bosch tumble dryer) might be of any help. http://www.espares.co.uk/advice/tumble-dryers/a/9/1346/how-to-replace-the-belt-on-a-tumble-dryer-bos.html
Will this part fit my appliance?
Check Now
